D-Tek / C-Systems CSP X2 or Danger Den DDC-12V

xwskx · 28-December-04, 08:59 PM

I have a lian li v1100 and i regret purchasing it.
The sound foam works pretty good, but the air circulation sucks.

To solve this problem i decided to install a dual 120mm radiator, "Black Ice XtremeII Radiator", on top of the case. So my problem is which pump should i use for a 3 water block system with a dual 120 mm radiator.
I want to keep my computer silent so which pump should i use the "D-Tek / C-Systems CSP X2 12v DC Pump" or "Danger Den DDC-12V". I'm also looking for an alternative pumps, so any suggestion is welcome.

I'll be using polarflo tt waterblock set for the cooling.

thanks in advance.

PurpleDiamond · 28-December-04, 10:48 PM

Don't go with the CSP - it leaks and corrodes. Read about the problems with it at procooling.com.
Is an AC pump an option? I think that the DDC can handle 3 blocks but maybe you should go with something that packs more punch.

Supahobnobba · 29-December-04, 12:15 AM

I have the DD12v and i cannot say enough about it, it would power those 3 blocks easily. Nothing lower than a hydor l35 or you wont be getting much flow through that system. by the way what blocks? high restriction or not?

xwskx · 29-December-04, 12:43 AM

Quote:

Originally Posted by Supahobnobba


	I have the DD12v and i cannot say enough about it, it would power those 3 blocks easily. Nothing lower than a hydor l35 or you wont be getting much flow through that system. by the way what blocks? high restriction or not?

polarflo tt block set

xwskx · 29-December-04, 01:24 AM

Quote:

Originally Posted by PurpleDiamond


	Don't go with the CSP - it leaks and corrodes. Read about the problems with it at procooling.com. Is an AC pump an option? I think that the DDC can handle 3 blocks but maybe you should go with something that packs more punch.

I don't mind using an ac pump as long as its quiet, and do you have a link to the article? i'm having trouble locating it.

SPECIALBLEND218 · 29-December-04, 01:44 AM

Get the danger den d4 pump all the way. Plenty of power and pretty quite too. The c-system won't put out enough for all three blocks.

ZENNZZO · 29-December-04, 02:51 AM

I run the DangerDen 12vt Pump myself, in 3/4" barbed model...the ID of the in/outlets on the 3/4" model are closer to the ID of 1/2" you have in the hose.
Mount in on a piece of Neoprene and run soft tubing like
TYGON r-3603, noise won't be an issue.
I've run HYDOR's, Mag drive's, Littlegiant, Rule's...by far the DangerDen 12vt.D-4 has been the best pump for me.

PurpleDiamond · 29-December-04, 03:11 PM

Here is one thread regarding problems with the CSP pump. Do a search and you'll find more. BTW rev. 2 didn't fix the problems - it still sux.

28-December-04, 08:59 PM		#1 (permalink)
xwskx Apex Techie Lite	D-Tek / C-Systems CSP X2 or Danger Den DDC-12V I have a lian li v1100 and i regret purchasing it. The sound foam works pretty good, but the air circulation sucks. To solve this problem i decided to install a dual 120mm radiator, "Black Ice XtremeII Radiator", on top of the case. So my problem is which pump should i use for a 3 water block system with a dual 120 mm radiator. I want to keep my computer silent so which pump should i use the "D-Tek / C-Systems CSP X2 12v DC Pump" or "Danger Den DDC-12V". I'm also looking for an alternative pumps, so any suggestion is welcome. I'll be using polarflo tt waterblock set for the cooling. thanks in advance. Last edited by xwskx; 29-December-04 at 12:42 AM..

29-December-04, 02:51 AM		#7 (permalink)
ZENNZZO Direct Cool Hoe	I run the DangerDen 12vt Pump myself, in 3/4" barbed model...the ID of the in/outlets on the 3/4" model are closer to the ID of 1/2" you have in the hose. Mount in on a piece of Neoprene and run soft tubing like TYGON r-3603, noise won't be an issue. I've run HYDOR's, Mag drive's, Littlegiant, Rule's...by far the DangerDen 12vt.D-4 has been the best pump for me. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Checkin' Out The Den, Danger Den.	Iateronmly	Daily Disturbance	9	23-March-06 03:28 AM
10% off all orders over $100 at Danger Den	FeRaL	PC Apex Web News	1	12-October-04 12:52 PM
10% off all orders over $100 at Danger Den	FeRaL	PC Apex Web News	5	26-July-04 04:30 PM
FS: Danger Den Watercooling	1000Islamics	Trading Post	0	29-April-04 08:51 PM
Are You In Danger? Look Here, And Find Out Now!	Anathema	Daily Disturbance	5	26-March-04 03:11 AM

28-December-04, 10:48 PM		#2 (permalink)
PurpleDiamond Apex Tech Maniac Supreme	Don't go with the CSP - it leaks and corrodes. Read about the problems with it at procooling.com. Is an AC pump an option? I think that the DDC can handle 3 blocks but maybe you should go with something that packs more punch.

29-December-04, 12:15 AM		#3 (permalink)
Supahobnobba Apex Master Tech Apprentice	I have the DD12v and i cannot say enough about it, it would power those 3 blocks easily. Nothing lower than a hydor l35 or you wont be getting much flow through that system. by the way what blocks? high restriction or not?

29-December-04, 01:44 AM		#6 (permalink)
SPECIALBLEND218 H2'Hoe' Cooling Addict	Get the danger den d4 pump all the way. Plenty of power and pretty quite too. The c-system won't put out enough for all three blocks.

29-December-04, 03:11 PM		#8 (permalink)
PurpleDiamond Apex Tech Maniac Supreme	Here is one thread regarding problems with the CSP pump. Do a search and you'll find more. BTW rev. 2 didn't fix the problems - it still sux.