new E6750, temps alright?

CommanderZero · 04-April-08, 01:25 AM

i got a new e6750 in my comp now, running watercooling. i also have a 7950gt in the loop. my cpu idles at ~42c. is that right? the temp seems to jump up pretty fast to ~48c if i open a window or etc. havent done any stress testing yet though.

reflux · 04-April-08, 06:40 AM

Load temps are more important. Run a stress-test like Orthos, Prime 95 or OCCT for ten minutes (to allow the maximum heat load to build up). Use CoreTemp to measure temperature.

AntiM · 04-April-08, 09:06 AM

Seems high for idle, try reseating your block before you go crazy. Looking at the pattern of TIM on the core should tell you if your mount was a little off.

My e6850 idles at about 5 degrees C over ambient temp with a Thermalright Ultra. It's 26C and idling at 31C right now.

Slaymate · 04-April-08, 05:23 PM

Your temp's seems pretty high for a water setup. I have a E6750 on air, Scythe Mine, and my idle temps are around 35-38dC using Core Temp. Plus I've got it overclocked to 3.6 GHz with 1.375 volts (and I live in Florida).

CommanderZero · 05-April-08, 07:49 AM

well tried running OCCT for 10 mins monitoring on coretemp, temps load is at 60c. could it posibly be the waterblock im using? i have a asetek waterblock with custom top, modded the nozzles, the results turned out to be for the worse though.

reflux · 05-April-08, 07:56 AM

That seems pretty high to me. My quad under water @ 1.5vCore loads at 60c.

What radiator do you have?

CommanderZero · 05-April-08, 08:20 AM

its a mcr-220 with 2 110cfm fans on it.

04-April-08, 01:25 AM		#1 (permalink)
CommanderZero Apex Master Tech	new E6750, temps alright? i got a new e6750 in my comp now, running watercooling. i also have a 7950gt in the loop. my cpu idles at ~42c. is that right? the temp seems to jump up pretty fast to ~48c if i open a window or etc. havent done any stress testing yet though.

04-April-08, 06:40 AM		#2 (permalink)
reflux Sempr0n?	Re: new E6750, temps alright? Load temps are more important. Run a stress-test like Orthos, Prime 95 or OCCT for ten minutes (to allow the maximum heat load to build up). Use CoreTemp to measure temperature.

04-April-08, 09:06 AM		#3 (permalink)
AntiM Aqua Pimp	Re: new E6750, temps alright? Seems high for idle, try reseating your block before you go crazy. Looking at the pattern of TIM on the core should tell you if your mount was a little off. My e6850 idles at about 5 degrees C over ambient temp with a Thermalright Ultra. It's 26C and idling at 31C right now.

04-April-08, 05:23 PM		#4 (permalink)
Slaymate PCApex Reviewer From Hell	Re: new E6750, temps alright? Your temp's seems pretty high for a water setup. I have a E6750 on air, Scythe Mine, and my idle temps are around 35-38dC using Core Temp. Plus I've got it overclocked to 3.6 GHz with 1.375 volts (and I live in Florida).

05-April-08, 07:49 AM		#5 (permalink)
CommanderZero Apex Master Tech	Re: new E6750, temps alright? well tried running OCCT for 10 mins monitoring on coretemp, temps load is at 60c. could it posibly be the waterblock im using? i have a asetek waterblock with custom top, modded the nozzles, the results turned out to be for the worse though.

05-April-08, 07:56 AM		#6 (permalink)
reflux Sempr0n?	Re: new E6750, temps alright? That seems pretty high to me. My quad under water @ 1.5vCore loads at 60c. What radiator do you have?

05-April-08, 08:20 AM		#7 (permalink)
CommanderZero Apex Master Tech	Re: new E6750, temps alright? its a mcr-220 with 2 110cfm fans on it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When is it alright to publically beat the crap out of your kid?	Rob	Anything Goes	19	27-June-07 12:57 AM
Alright, i need some help	microsoftman	Case Modding	30	07-April-04 11:23 AM
Alright, part 2. What color tubing?	pstine	Case Modding	9	21-November-02 11:06 PM
alright i need ur opinion	viper92086	Anything Goes	11	21-August-02 02:08 PM
Alright, I know I am asking a lot, but c'mon!	Tom10167	Other PC Problem / Help	3	19-August-02 06:04 PM