More LCD Module Deals

Nerdz · 21-December-05, 06:20 PM

I dont think I posted this before, but these are from All Electronics Corp. These (well some) arent as colorful (Im guessing) as the ones I posted before

24 CHARACTER X 2 LINE LCD W/ EL BACKLIGHT, USED

http://www.allelectronics.com/cgi-bi...107&type=store

Your Price: $4.00 each

16 CHARACTER X 4 LINE LCD W/ LED BACKLIGHT

http://www.allelectronics.com/cgi-bin/category.cgi?category=365&item=LCD-108&type=store
Your Price: $12.50 each

256 X 128 LCD PANEL

http://www.allelectronics.com/cgi-bi...101&type=store

Your Price: $18.50 each (not bad in my book)

640 X 400 LCD DISPLAY W/ EL BACKLIGHT

http://www.allelectronics.com/cgi-bi...103&type=store

Your Price: $7.75 each

640 X 480 LCD W/CCFL BACKLIGHT & INVERTER

http://www.allelectronics.com/cgi-bi...104&type=store

Your Price: $11.00 each

20 X 4 LCD WITH LED BACKLIGHT

http://www.allelectronics.com/cgi-bi...-89&type=store

Your Price: $24.80 each

40 CHARCTER X 4 LINE LCD

http://www.allelectronics.com/cgi-bi...-85&type=store

Your Price: $24.00 each

40 X 4 LCD WITH LED BACKLIGHT

http://www.allelectronics.com/cgi-bi...-91&type=store

Your Price: $29.00 each

256 X 64 GRAPHIC LCD MODULE

http://www.allelectronics.com/cgi-bi...-92&type=store

Your Price: $12.00 each

12 VDC 3.5 AMP POWER SUPPLY
__________________________________________________ ______________________________
12Vac/2.5A Plug In Underwater Transformer

http://www.bgmicro.com/prodinfo.asp?sid=069872685185185266159176105&prodid=PWR1152&page=5&cri=PWR&stype=2

Price:

$1.79

(I know it says underwater, but you can still use it as a 2nd PSU for Fans or what ever else, Thats a pretty good deal too)

12 Volts not your style? Well how about this:

5VDC/4A Switcher

http://www.bgmicro.com/prodinfo.asp?...ri=PWR&stype=2

Price:

$8.49

6 Outlet Power Strip ABS

Price:

$3.99

http://www.bgmicro.com/prodinfo.asp?...ip+ABS&stype=3

Need More Power? How about a 24V Powersupply

Enclosed Switcher
Input: 100-230Vac. Output: 24Vdc/ 4.4A(100Vac in), 5A(230Vac in). Measures 7-3/4"x4-3/8"x1-1/2". PWR1165....

Good for those 24V Pelts!

Price:

$24.95

http://www.bgmicro.com/prodinfo.asp?...itcher&stype=3

THRASHER2 · 21-December-05, 07:18 PM

DAMIT ALL TO HELL!!!!!!
Sweeeeet deals Nerdz...........more damn projects in the future!!!

Kratos · 21-December-05, 07:56 PM

Eyeing those LCDs! Mmmmm! REP+! w00t!

THRASHER2 · 23-December-05, 01:30 AM

OMG!!!! I found some more sweeeet deals!!!! (ready to install)
http://www.mp3playerstore.com/stuff_...ial/index.html

Executioner · 05-January-06, 09:23 PM

Hey Thrasher the lcd's from all electronics, can they be easily hooked up like the lcd mods for almost $100
from mod supply sites? Or do I need either an electronics degree or someone expierenced and willing to
do the wiring?
Not being sarcastic, I'd like to get an lcd but I got no electronics knowledge at all.
and at less than $20 it's tempting!
I'd almost need plug and play, well plugin atleast and software to install.

Nerdz · 05-January-06, 09:26 PM

Quote:

Originally Posted by Executioner


	Hey Thrasher the lcd's from all electronics, can they be easily hooked up like the lcd mods for almost $100 from mod supply sites? Or do I need either an electronics degree or someone expierenced and willing to do the wiring? Not being sarcastic, I'd like to get an lcd but I got no electronics knowledge at all. and at less than $20 it's tempting! I'd almost need plug and play, well plugin atleast and software to install.

If your not confident your self, you can get somone to wire it for you. But other than that, its pretty easy. YOu just follow a diagram, and compare it with the datasheet of the LCD

And Yes, Those LCDs are as good as the ones you can get for 100bucks. Thats the whole beauty of DIY, you can get it cheaper than what other sites are charging for it.

Of course other sites have USB support, but the ones you can make your self can be hooked up via parallel port.

For software use LCD Smartie.

Executioner · 05-January-06, 11:38 PM

Ok COOL! right of the bat I can say I would rather not tackle wiring it up.
Anyone with lcd experience looking for a few bucks for an easy job?
(should I post this in trading instead?)

256Killa · 09-January-06, 08:23 PM

So is there such a serial cable that would plug into the pin-out header on my board to the female serial port on the back of my Matrix Orbital VK204-25? If so, where could I get it?

Nerdz · 09-January-06, 08:35 PM

Im pretty sure so, But I think you would have to buy the chip yourself, and assemble it yourself. I could be wrong.

256Killa · 09-January-06, 11:29 PM

Quote:

Originally Posted by Nerdz


	Im pretty sure so, But I think you would have to buy the chip yourself, and assemble it yourself. I could be wrong.

Thanks man. But "buy the chip?" What chip?

Nerdz · 09-January-06, 11:37 PM

Its a chip that turns The serial out from your Com port into a Parallel port Connection your LCD can use

256Killa · 10-January-06, 12:05 AM

Oh I see. Actually, this thing has an actual female DB9 RS-232 Serial port on the back. But finally, after 3 hours of reading I found this: http://www.abccables.com/ca-003606.html

Nerdz · 10-January-06, 12:22 AM

Quote:

Originally Posted by 256Killa


	Oh I see. Actually, this thing has an actual female DB9 RS-232 Serial port on the back. But finally, after 3 hours of reading I found this: http://www.abccables.com/ca-003606.html

No thats not it. Its a chip you have to solder to a board your self.

256Killa · 10-January-06, 12:52 AM

Quote:

Originally Posted by Nerdz


	No thats not it. Its a chip you have to solder to a board your self.

Why would I want to solder anything when I could just use the built-in serial port? Not to mention my board has a serial port pin-out on it. Should all work pretty well. The darn shipping really jacked the price at that cable shop though.

Nerdz · 10-January-06, 01:19 AM

Oh yea but I was saying if you want to use a regular parallel port LCD with the serial port you need a special chip to do it.

256Killa · 10-January-06, 02:06 PM

Ohhh, I gotcha. By the way, I just got an email from that cable shop saying they cancelled my order because the item is discontinued. Now I'm scrooged all over again.

Nerdz · 10-January-06, 02:15 PM

You can buy a Serial Cord Any where (any electronics resaler)

Such as bgmicro.com, the site mentioned in my post (#1), and jameco.com (at least thats where they are cheap..)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fry's newspaper deals GOOD DEALS !!!!	HigHTecHReDNecK	Deals and Steals	12	12-June-06 06:59 PM
CMS module	stitchup	Anything Goes	1	03-June-06 12:06 PM
More LCD Module Deals	Nerdz	Deals and Steals	8	22-October-05 10:54 PM
PocketPC GPS module ??	G Money	Anything Goes	2	19-August-03 09:49 AM
Need info on RF module	star882	Anything Goes	3	18-April-03 05:53 PM

21-December-05, 07:18 PM		#2 (permalink)
THRASHER2 PCApex Newscaster	DAMIT ALL TO HELL!!!!!! Sweeeeet deals Nerdz...........more damn projects in the future!!!

21-December-05, 07:56 PM		#3 (permalink)
Kratos Apex Tech Fanatic Supreme	Eyeing those LCDs! Mmmmm! REP+! w00t!

23-December-05, 01:30 AM		#4 (permalink)
THRASHER2 PCApex Newscaster	OMG!!!! I found some more sweeeet deals!!!! (ready to install) http://www.mp3playerstore.com/stuff_...ial/index.html

05-January-06, 09:23 PM		#5 (permalink)
Executioner Apex Master Tech	Hey Thrasher the lcd's from all electronics, can they be easily hooked up like the lcd mods for almost $100 from mod supply sites? Or do I need either an electronics degree or someone expierenced and willing to do the wiring? Not being sarcastic, I'd like to get an lcd but I got no electronics knowledge at all. and at less than $20 it's tempting! I'd almost need plug and play, well plugin atleast and software to install.

05-January-06, 11:38 PM		#7 (permalink)
Executioner Apex Master Tech	Ok COOL! right of the bat I can say I would rather not tackle wiring it up. Anyone with lcd experience looking for a few bucks for an easy job? (should I post this in trading instead?)

09-January-06, 08:23 PM		#8 (permalink)
256Killa Apex Techie Wannabe	So is there such a serial cable that would plug into the pin-out header on my board to the female serial port on the back of my Matrix Orbital VK204-25? If so, where could I get it?

09-January-06, 08:35 PM		#9 (permalink)
Nerdz Sir Knight of Spamalot	Im pretty sure so, But I think you would have to buy the chip yourself, and assemble it yourself. I could be wrong.

09-January-06, 11:37 PM		#11 (permalink)
Nerdz Sir Knight of Spamalot	Its a chip that turns The serial out from your Com port into a Parallel port Connection your LCD can use

10-January-06, 12:05 AM		#12 (permalink)
256Killa Apex Techie Wannabe	Oh I see. Actually, this thing has an actual female DB9 RS-232 Serial port on the back. But finally, after 3 hours of reading I found this: http://www.abccables.com/ca-003606.html

10-January-06, 01:19 AM		#15 (permalink)
Nerdz Sir Knight of Spamalot	Oh yea but I was saying if you want to use a regular parallel port LCD with the serial port you need a special chip to do it.

10-January-06, 02:06 PM		#16 (permalink)
256Killa Apex Techie Wannabe	Ohhh, I gotcha. By the way, I just got an email from that cable shop saying they cancelled my order because the item is discontinued. Now I'm scrooged all over again.

10-January-06, 02:15 PM		#17 (permalink)
Nerdz Sir Knight of Spamalot	You can buy a Serial Cord Any where (any electronics resaler) Such as bgmicro.com, the site mentioned in my post (#1), and jameco.com (at least thats where they are cheap..)