Modder's mesh kinda............

HigHTecHReDNecK · 01-October-05, 08:19 PM

Went to Home Depot today and i found a good deal on some mesh *see pic* it costs $1.98 and you get a 3ft by 6" sheet. Just go to the rain gutter dept. its the screen they use to keep leaves out

T-Hoe-ster Mod · 01-October-05, 08:29 PM

Schwweet, got any plans for it or is just a good deal that caught your eye?

Highperf15 · 01-October-05, 08:33 PM

That's a good idea....

SiathLinux · 01-October-05, 08:58 PM

Excellent find, could use that on the case I've got my dual piii in right now...about to cut the front bezel cover to free up some airflow to the 4 80mm fans that are behind it...

try to make it not look like a hack job, but I don't have a dremel...(too poor)...

ranger1033 · 01-October-05, 09:35 PM

I don't have a Home Depot in my area i wonder if Lowe's has the same stuff. Also i was wondering would that mesh work good between fan grill and fan itself.Or would it be better just to buy them already made. Like these i manly want it for protection because i am using these fan grills ffice

ffice" />

fan guards

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_92&products_id=3403

fan grills i have both 80mm and 120mm
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_91_111&products_id=892

Cpl Rampage · 01-October-05, 09:46 PM

you should post this in the tips and tricks part of the fourm, good find man

HigHTecHReDNecK · 02-October-05, 12:44 AM

Quote:

Originally Posted by ranger1033


	I don't have a Home Depot in my area i wonder if Lowe's has the same stuff. Also i was wondering would that mesh work good between fan grill and fan itself.Or would it be better just to buy them already made. Like these i manly want it for protection because i am using these fan grills fficeffice" /> fan guards http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_92&products_id=3403 fan grills i have both 80mm and 120mm http://www.performance-pcs.com/catal...roducts_id=892

I think it would work ok, also im SURE they have it at lowe's too, if i was you though i'd take one grill with you to see cause this stuff is a bit thick so it will make the grill stand off more

HigHTecHReDNecK · 02-October-05, 12:52 AM

Quote:

Originally Posted by Cpl Rampage


	you should post this in the tips and tricks part of the fourm, good find man

good idea, i think i did but i got some kinda message after i tryed to post, couldnt read it , it went too fast lol

SiathLinux · 02-October-05, 12:55 AM

Funny thing is I have a Lowes and Home Depot all within 1 mile of my apartment...have a little (ie not super) Walmart too..)

carbongraphite · 02-October-05, 02:34 AM

its called expaned metal because of the way it is made (cut slits and then it is stretched so the slits become holes)

Foe · 02-October-05, 06:22 AM

If you look at this image from the Splitter case I did, I used the black gutter guard for replacement over the fans.

HigHTecHReDNecK · 02-October-05, 01:54 PM

Thats SWEET Foe, cool now i know it looks good , and COMES IN BLACK!!!!

RIGHT ON

ranger1033 · 02-October-05, 04:05 PM

Quote:

Originally Posted by HigHTecHReDNecK


	I think it would work ok, also im SURE they have it at lowe's too, if i was you though i'd take one grill with you to see cause this stuff is a bit thick so it will make the grill stand off more

Ok will just have to take the grill with me like you said to lowe's thanks for the info, HigHTecHReDNecK

FunkyFresh · 03-October-05, 02:27 PM

Nice find; I always like hearing about the mod potential in everyday items...

01-October-05, 08:19 PM		#1 (permalink)
HigHTecHReDNecK Sophist'Hoe"cated ReDNecK Reviewer	Modder's mesh kinda............ Went to Home Depot today and i found a good deal on some mesh see pic it costs $1.98 and you get a 3ft by 6" sheet. Just go to the rain gutter dept. its the screen they use to keep leaves out

01-October-05, 09:35 PM		#5 (permalink)
ranger1033 Imperial News Bounty Hunter	I don't have a Home Depot in my area i wonder if Lowe's has the same stuff. Also i was wondering would that mesh work good between fan grill and fan itself.Or would it be better just to buy them already made. Like these i manly want it for protection because i am using these fan grills fficeffice" /> fan guards http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_92&products_id=3403 fan grills i have both 80mm and 120mm http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_91_111&products_id=892

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Custom 80mm led fans, 92mm fan, Modder's Mesh	m3_tw0	Trading Post	5	19-July-06 07:24 PM
Painting Modder's Mesh	Plantmiester	Painting	7	24-June-06 12:50 AM
Modder's mesh kinda * from deals forum*	HigHTecHReDNecK	Member Modding Tips and Guides	0	02-October-05 12:49 AM
Modder's Kit plus a 10% discount!!	dracos	Deals and Steals	1	20-May-05 01:13 PM
Maximum PC... modder's mag?	Darksamurai	Anything Goes	17	14-April-03 09:16 PM

01-October-05, 08:29 PM		#2 (permalink)
T-Hoe-ster Mod Apex Advanced Techie	Schwweet, got any plans for it or is just a good deal that caught your eye?

01-October-05, 08:33 PM		#3 (permalink)
Highperf15 a.k.a., Frank Bullitt	That's a good idea....

01-October-05, 08:58 PM		#4 (permalink)
SiathLinux Apex Master Tech Apprentice	Excellent find, could use that on the case I've got my dual piii in right now...about to cut the front bezel cover to free up some airflow to the 4 80mm fans that are behind it... try to make it not look like a hack job, but I don't have a dremel...(too poor)...

01-October-05, 09:46 PM		#6 (permalink)
Cpl Rampage Apex Tech Fanatic Supreme	you should post this in the tips and tricks part of the fourm, good find man

02-October-05, 12:55 AM		#9 (permalink)
SiathLinux Apex Master Tech Apprentice	Funny thing is I have a Lowes and Home Depot all within 1 mile of my apartment...have a little (ie not super) Walmart too..)

02-October-05, 02:34 AM		#10 (permalink)
carbongraphite Pow - Hoe playa	its called expaned metal because of the way it is made (cut slits and then it is stretched so the slits become holes)

02-October-05, 06:22 AM		#11 (permalink)
Foe Apex Tech God	If you look at this image from the Splitter case I did, I used the black gutter guard for replacement over the fans.

02-October-05, 01:54 PM		#12 (permalink)
HigHTecHReDNecK Sophist'Hoe"cated ReDNecK Reviewer	Thats SWEET Foe, cool now i know it looks good , and COMES IN BLACK!!!! RIGHT ON

03-October-05, 02:27 PM		#14 (permalink)
FunkyFresh 'Da Doctor of Funk	Nice find; I always like hearing about the mod potential in everyday items...