I've relapsed back into an extreme/insane state of mind, this time with a P-4 in hand...
At first I was going to run the IHS and vent the breather hole into the cooler body via a snokel.
Thinking to myself, that wouldn't really be direct die cooling, a change in plans was in order.
So out came the razor knife just to get a look see at the innerworkings of the P-4 die...

Attached Thumbnails

 

ahhh,
And there is that baby-ass smooth chip.
This calls for a cellabration...YEA......Ok, now that the super glue is holding the skin closed,(minor slip of the new razor knife) and the bleeding has stopped, notice how the area around the Die is free from resistors ala Barton, T-Bred.

Attached Thumbnails

 

Here is a comparison in size, the P-4 CPU to the AMD CPU.
Soooo much more room to work with on a P-4 motherboard. this will be fun...Phatt fingers and all.

Attached Thumbnails

 

Step away from the epoxy resins... I think the fumes have over taken you bortha

Nice work on the heat spreader btw!

i thought you had wooden hands from the fishing accidents? j/k
i think you should make a nuclear case mod. cooling stacks on top with instead of a radiator a heat exchanger that drops the water through the air just like real stacks. and a resivor shaped like a reactor.
good luck with the super pimpness

Thanx FeRal
Haz-mat ( the o' lady/warden/$$ haver) forces closure of all resins and "solvents" at camp zennzzo...HaH! we're goin underground...No. cast acrylic double O-ring, see through spray bar, worthy of ultra close ups, style. this time.
My oladies cousin who stops by, works at Satsop necular.
and thinks that the sucurity system that is computerized is, bullet proof....WIN me...hehehehhe funny thing is it's 36mi. from here.

Have you checked to see if the chip is dead after cutting the heatspreader off?

A lot of people take the spreader off claiming that mounting the heatsink/waterblock directly to the die provides better cooling.

But I've never seen a P4 direct die watercooled before. If any of you pimps find a link please enlighten me, but all I've ever seen were AMD CPU's.

hell i tore the heat spereader off the second that my P4 (1.7 socket 423) was given to me. it actually reduced the operating temp by a few degrees. the IHS now resides on my keychain and now become a server for work. just a webserver. but i think the IHS is a bad idea. Although i ran a 1.6 (423) for about 8 minutes with no heatsink to try and burn it up......in the name of science... it didnt happen. put a HSF on it ran like a champ. so i cut the IHS off and it comensed to setting itself on fire i think it reduces the efficency of heat transfer. going through two "non-solid" subatances and two distinct metal surfaces, can't be condusive to good heat transfer.
but hey thats just my two cents.

if this works....

im doin same thing .

hum direct die cooling wit a pelt...drool

***update- the O-rings are here, the O-rings are here! YEA!
#15 and a #19 from the fellas at Danco Co. YEA!

BA gimme a while and I'll have one for ya. bro
ClowN damit,
You just got my brain going too fast!!

Dam Rokk, I wish I had your skillz...and tools.
Here is an l337 MS Paint, rendering on the DD1.1 P-4.
It's all about carving the plexi, now....sure would be nice to find some 1/2" plexi stock!
1/4" @ 5.25 a square ain't so bad....
edit: due to recent advances in avalable stock this design will be
"C-Ya'ed" see next post for advancments...KS you da shizzle dood!!Tankx

Attached Thumbnails

 

Well, then the other project really will kill them, eh? Wonder what they're gonna think?

Speaking of, check thou thine PMs.

I thought I was the only one that used electrical tape as bandaids. Lookin good and a great concept!

dont home depot sell 1/2 stock?

Nope, it tops out at 1/4

Too bad Zen, you fold for the wrong team. I could have found some 1/2 for you.

Man I think I would poop in my pants if I ever opened up a P4 out of sheer confusion as to what to do next.

I wonder what ZENNZZO shall do next.

RC, the super -glue is the trick! stings but the red factor goes away...I'm also a subscriber to Ghetto chrome on the really big
gashes...

Invent My whole world is controlled confusion, I'm a commercial fisherman who can only dog paddle remember...And the voices in my head just say "build it, it will work"!! and the other one says "zenz, use the force,hey stoopid, use the foken force"...that's when I usually bleed myself...

Clown, Neo is right, and mine tops out at 1/8".

Lokie, bro , ouch, dood....

Kayin in the House...Great Find 'm niknik...Should I bust a move and say what ya found me??? Aight den..
Mr. Kayin has linked me to a site that is just dying to ship me ...heh heh heh Acrylic BLOCKS 3'' x 3'' x 3'' for ...tada.. 9snaps...Ask and he Shall recieve!! w00000t!! heh heh heh
Acrylic heaven...Thanks Kayin and they are on the way!!!!
Acrylic sculptures...zennzzo style sta-tuned