Can you help me find this case?

BZA · 30-September-03, 09:13 AM

I remember seeing a cas somewhere that had (theorhetically) enough room in the front bezel for a 120 mm fan but the power and reset buttons were dead center in the middle of the bezel.

They were two circular buttons, one in the center, and one which formed a ring around the other. Center was power and the ring around them was the reset button. I saw one modded here once, this person painted it blue. I can't find it for the life of me and a really neat idea came to me in my sleep.

Anybody help?

It had 3 or 4 5 1/4 bays and 2 small ones.

it has a smokey grey plastic overlay...

Rafiki · 30-September-03, 06:02 PM

like this?...
before you ask,i got it off of ebay 2 yrs ago for 20 bucks and i dont remember the brand.

BZA · 01-October-03, 09:14 AM

DOH! That is exactly it!

hmmmmmmm!!!!!!!!

anybody know what it is??

BZA · 01-October-03, 09:17 AM

ok, ill share with you, my idea, in case you know of a better case.

I want to take a case with a power/reset button in the center of the front and cut a large hole around the buttons and place a fan there, then, I want to cover the hole with mesh of some kind and then mount the buttons in the mesh, so the buttons are covering the hub of the fan.

Anybody know of another case with a power/reset button dead smack in the middle of the case with enough roon for a 120mm hole around it?

putwig · 01-October-03, 09:21 AM

You can move the buttons to the middle on any case you choose.

BZA · 01-October-03, 09:33 AM

i suppose you are right, I have found tho, that the ones that make the most sense (in my brain) are the ones with 2-in-1 buttons, a button inside a button. and those are like the one pictured above.

I could move the buttons, you are right. but I guess i'm looking for a more specific kind of button. Bondo is my friend.

Gracias!

BZA · 01-October-03, 09:33 AM

Oh, and putwig, if you are going to be practicing in Florida, I sell malpractice insurance and would love to help you out in the event you go into private practice.

putwig · 01-October-03, 09:41 AM

I am in Canada Bro. We are all covered by the CMPA (Canadian Medical Protective Agency).

ZENNZZO · 01-October-03, 10:27 AM

DR.PUTWIG. HYDRO-PIMP MD.
Hey bro, gonna make a heluva shingle!!

30-September-03, 09:13 AM		#1 (permalink)
BZA Semin-Hoe-Le Supp-Hoe-Ter	Can you help me find this case? I remember seeing a cas somewhere that had (theorhetically) enough room in the front bezel for a 120 mm fan but the power and reset buttons were dead center in the middle of the bezel. They were two circular buttons, one in the center, and one which formed a ring around the other. Center was power and the ring around them was the reset button. I saw one modded here once, this person painted it blue. I can't find it for the life of me and a really neat idea came to me in my sleep. Anybody help? It had 3 or 4 5 1/4 bays and 2 small ones. it has a smokey grey plastic overlay...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help me find a good case!	traktor	Case Modding	10	22-February-05 07:07 PM
Help me pick/find Case	danbanger	Anything Goes	3	01-March-04 10:21 PM
help find a case for WDoG!!!	WDoG	Case Modding	11	09-October-03 11:46 PM
Need to find the right case.	KilJaeden	Case Modding	22	27-June-03 12:40 AM
Help me find plans for a case	samson12345	Case Modding	1	30-April-03 12:49 PM

30-September-03, 06:02 PM		#2 (permalink)
Rafiki Apex Tech Maniac	like this?... before you ask,i got it off of ebay 2 yrs ago for 20 bucks and i dont remember the brand.

01-October-03, 09:14 AM		#3 (permalink)
BZA Semin-Hoe-Le Supp-Hoe-Ter	DOH! That is exactly it! hmmmmmmm!!!!!!!! anybody know what it is??

01-October-03, 09:17 AM		#4 (permalink)
BZA Semin-Hoe-Le Supp-Hoe-Ter	ok, ill share with you, my idea, in case you know of a better case. I want to take a case with a power/reset button in the center of the front and cut a large hole around the buttons and place a fan there, then, I want to cover the hole with mesh of some kind and then mount the buttons in the mesh, so the buttons are covering the hub of the fan. Anybody know of another case with a power/reset button dead smack in the middle of the case with enough roon for a 120mm hole around it?

01-October-03, 09:21 AM		#5 (permalink)
putwig Dr. Hydro Pimp	You can move the buttons to the middle on any case you choose.

01-October-03, 09:33 AM		#6 (permalink)
BZA Semin-Hoe-Le Supp-Hoe-Ter	i suppose you are right, I have found tho, that the ones that make the most sense (in my brain) are the ones with 2-in-1 buttons, a button inside a button. and those are like the one pictured above. I could move the buttons, you are right. but I guess i'm looking for a more specific kind of button. Bondo is my friend. Gracias!

01-October-03, 09:33 AM		#7 (permalink)
BZA Semin-Hoe-Le Supp-Hoe-Ter	Oh, and putwig, if you are going to be practicing in Florida, I sell malpractice insurance and would love to help you out in the event you go into private practice.

01-October-03, 09:41 AM		#8 (permalink)
putwig Dr. Hydro Pimp	I am in Canada Bro. We are all covered by the CMPA (Canadian Medical Protective Agency).

01-October-03, 10:27 AM		#9 (permalink)
ZENNZZO Direct Cool Hoe	DR.PUTWIG. HYDRO-PIMP MD. Hey bro, gonna make a heluva shingle!!