Short Circuit updates

j-dogg · 28-September-03, 12:54 AM

-Cleaned up the wires a whole lot

-Used tie-wraps to hold the wires under the HDD rack by attaching the tie-wrap to a HDD mounting hole

-Folded the IDE ribbons and hid them between the side of the case and the HDD rack

-Added 5.25" bay covers

Other mods

-Ghetto-modded HSF on the Radeon 9000, stock HS with a 50MM Socket 7 Fan screwed into the HS. Actually felt a difference on the back of the GPU it actually runs a little cooler.

Nothing too serious, just going a litte ways to clean it up and fix all that spaghetti

j-dogg · 28-September-03, 12:57 AM

There's a nice shot of the BIOS screen on that huge monitor i found on the side of the road.

j-dogg · 28-September-03, 01:02 AM

Damn glare messed up the contrast on this pic but you can still see what I did

$SOLID$ Necro · 28-September-03, 01:17 AM

Like the trace effects

Is that the new Motherboard in there?

That top is begging for a fan and a dremel !!!

Green or white sleeves or wire conduit would be a nice finishing touch

CadPimpin it up there

j-dogg · 28-September-03, 01:34 AM

nope thats actually the original board. the new one is in LANtastic. that board in SC was bought with this case and a Duron 850 by one of my friends who later parted it out and I ended up getting the case last.

mr.mods · 28-September-03, 10:50 PM

from me
the kid hhad the hole thing a nasty silver.

and i took some gas to it

Ben · 28-September-03, 11:36 PM

Heres a tip to clean up those unused PSU connectors- Take the cover off your PSU and pull the unused cable inside of the unit and see if there is space that you could fold/wrap the cable in that would not restrict cooling much- Did it to mine and helps the case internals look a bit cleaner.

28-September-03, 12:54 AM		#1 (permalink)
j-dogg Mystical Schwinn Guru	Short Circuit updates -Cleaned up the wires a whole lot -Used tie-wraps to hold the wires under the HDD rack by attaching the tie-wrap to a HDD mounting hole -Folded the IDE ribbons and hid them between the side of the case and the HDD rack -Added 5.25" bay covers Other mods -Ghetto-modded HSF on the Radeon 9000, stock HS with a 50MM Socket 7 Fan screwed into the HS. Actually felt a difference on the back of the GPU it actually runs a little cooler. Nothing too serious, just going a litte ways to clean it up and fix all that spaghetti Attached Thumbnails Last edited by j-dogg; 28-September-03 at 12:59 AM..

28-September-03, 12:57 AM		#2 (permalink)
j-dogg Mystical Schwinn Guru	There's a nice shot of the BIOS screen on that huge monitor i found on the side of the road. Attached Thumbnails

28-September-03, 01:02 AM		#3 (permalink)
j-dogg Mystical Schwinn Guru	Damn glare messed up the contrast on this pic but you can still see what I did Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Slashdot // Schools Act to Short-Circuit 'Cyberbullying'	Gizmo	Slashdot RSS	0	25-January-07 10:40 AM
Short Circuit v2.0	j-dogg	Project Worklogs	9	05-June-04 04:00 PM
Short Circuit and DirectX	j-dogg	Windows OS Problems	2	07-March-04 08:04 PM
Short Circuit won't shut off	j-dogg	Windows OS Problems	8	21-January-04 09:15 AM
'Short Circuit' nearing completion....	j-dogg	Case Modding	15	12-August-03 11:32 PM

28-September-03, 01:17 AM		#4 (permalink)
$SOLID$ Necro Mastah Overclocker	Like the trace effects Is that the new Motherboard in there? That top is begging for a fan and a dremel !!! Green or white sleeves or wire conduit would be a nice finishing touch CadPimpin it up there

28-September-03, 01:34 AM		#5 (permalink)
j-dogg Mystical Schwinn Guru	nope thats actually the original board. the new one is in LANtastic. that board in SC was bought with this case and a Duron 850 by one of my friends who later parted it out and I ended up getting the case last.

28-September-03, 10:50 PM		#6 (permalink)
mr.mods Apex Master Tech	from me the kid hhad the hole thing a nasty silver. and i took some gas to it

28-September-03, 11:36 PM		#7 (permalink)
Ben Mote-Hoe-Cross	Heres a tip to clean up those unused PSU connectors- Take the cover off your PSU and pull the unused cable inside of the unit and see if there is space that you could fold/wrap the cable in that would not restrict cooling much- Did it to mine and helps the case internals look a bit cleaner.