ok wtf... gg newegg and UPS

KiwiFlavor · 30-December-05, 04:44 PM

ok so ive been waiting for this case i ordered and guess what it's f-ing broken.. shattered WOW !!!! i called newegg.. and they said they'd give me refund.. and i can keep the case.. **** you newegg.. the front bezel is so broken.. im so pissed now.. anyway.. can you fellow pimps help me to just do something about the front bezel? gawd i hate this =/

here's pictures

Iateronmly · 30-December-05, 04:47 PM

Uhh - you're getting a refund with little problem. Guess what - crap breaks in transit. Buy something broken at a lot of stores, they'll grill you to the fifth degree and don't even refund, they give you a replacement after making you drive back and forth 2 times.

NewEgg isn't as cheap as it used to be, but customer service is beyond the call of duty.

Sparky · 30-December-05, 04:50 PM

Not so bad......Your gonna have to mod it though

Just get some regular old super adhesive, like super glue or something. Glue it back together and sand it flat where you glued. Get some bondo and fill in any cracks that are left. Let dry, and sand flat again. Primer, Paint, and Pimp. Best thing about this is you got your cash back and a free case

KiwiFlavor · 30-December-05, 04:55 PM

well yeah.. i guess you all right.. but the thing is.. on the 4th picture u'll see that the pin/clip to hold the case is broken too.. so.. what should i do??

Sparky · 30-December-05, 05:05 PM

Get some acrylic tubing and mount it in its place, then screw a hole threw your case and screw it on. Simple fix bro. You could also punch it, or give it a good slap.

beachbum86 · 30-December-05, 05:05 PM

ship it to me.... ill find a use for it...thos are just minor problems.

when modding a case, it usually looks broken before its finished anyway.

KiwiFlavor · 31-December-05, 12:41 AM

Quote:

Originally Posted by beachbum86


	ship it to me.... ill find a use for it...thos are just minor problems. when modding a case, it usually looks broken before its finished anyway.

]

rofl this is for my project

Hawk. Rev.2

anyway.. yeah i'll try those ways.. guyz thanks a lot.. sorry i was kinda upset at the moment

Nerdz · 31-December-05, 12:49 AM

Save the case, its probably Fedex or UPS that messed up. We had that happen and they gave us another case for free.

KiwiFlavor · 31-December-05, 01:24 AM

yeah i can keep the case xD

btw what's a good plastic glue??

KiwiFlavor · 31-December-05, 11:32 AM

a lil bump.. oh and with what grit should i sand the bondo with?

thanks

RBIEZE · 31-December-05, 12:49 PM

Heres a link for all types of plastic adhesives

http://www.ipscorp.com/ind_html/index.shtml

KiwiFlavor · 31-December-05, 12:55 PM

oh thanks

btw what's the material of computer front covers? i know it's plastic, but. is it ABS? or wutever? lol

Kratos · 31-December-05, 01:04 PM

If you want to take a chance, you could use some of the hobby glue that you'd usually use with model kits. It's made for bonding all pastic surfaces.

RBIEZE · 31-December-05, 01:28 PM

Well you could try Plastruct plastic weld ,it covers many types of plastics .
Personally Id find out what kind of plastic the bezal is made of and use one of the adhesives made specifically for it.
Did you look up your case?it probably says what its made from .
heres the link for plastruct http://www.plastruct.com/Pages/Hobby.html

KiwiFlavor · 31-December-05, 04:10 PM

hey thanks man.. i went to home depot and bought a super glue.. and it works like a wonder

YAYAYAY !

luckybob · 31-December-05, 05:02 PM

OK let me get this straight.

1. you chew out newegg for something that broke in shipping...

2. newegg says "ok fine" and sends you a new one free of charge.

how can you complain about this? seriously? ups broke it! bitch to them! hells bells, i HATE ups. they have lost more stuff than usps or fedex combined. I had a server once. a 6U rackmout, it weighed 125 pounds. and somehow they "lost" it.

and the "problems" you had were easily fixed. newegg got the short end of the stick. and the least you can do is tell them tanks for handleing the situation quickly and professionally even though it was upsor the manufacturer's fault.

KiwiFlavor · 01-January-06, 01:31 AM

yeah i know.. im sorry, i was so upset

!! sigh im gonna try to control myself ! (new year resolution) lol

but yeah i better apologize and say thanks to them

ncgchlct · 04-January-06, 06:17 PM

you should consider yourself lucky if anything

KiwiFlavor · 04-January-06, 09:09 PM

Quote:

Originally Posted by ncgchlct


	you should consider yourself lucky if anything

yup i am lucky allright

and i apologized to them.. and next time, im gonna control myself and not just jumped into conclusions

thanks guyz ! you all are great!

30-December-05, 04:44 PM		#1 (permalink)
KiwiFlavor Apex Tech Fanatic	ok wtf... gg newegg and UPS ok so ive been waiting for this case i ordered and guess what it's f-ing broken.. shattered WOW !!!! i called newegg.. and they said they'd give me refund.. and i can keep the case.. **** you newegg.. the front bezel is so broken.. im so pissed now.. anyway.. can you fellow pimps help me to just do something about the front bezel? gawd i hate this =/ here's pictures Attached Thumbnails

30-December-05, 04:55 PM		#4 (permalink)
KiwiFlavor Apex Tech Fanatic	well yeah.. i guess you all right.. but the thing is.. on the 4th picture u'll see that the pin/clip to hold the case is broken too.. so.. what should i do?? Last edited by KiwiFlavor; 30-December-05 at 05:00 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LoL @ newegg	killert	Anything Goes	4	07-January-07 08:59 AM
NewEgg Contest	THRiLL KiLL	Anything Goes	9	25-November-06 12:21 AM
Newegg	THRiLL KiLL	Anything Goes	4	12-September-05 07:27 PM
Is NewEgg Down?	SirDavisCarrots	Anything Goes	16	28-September-04 01:11 AM
Newegg, THG, and the Consumer.	TiZakit	Anything Goes	5	24-February-04 03:35 PM

30-December-05, 04:47 PM		#2 (permalink)
Iateronmly Smooth Operator	Uhh - you're getting a refund with little problem. Guess what - crap breaks in transit. Buy something broken at a lot of stores, they'll grill you to the fifth degree and don't even refund, they give you a replacement after making you drive back and forth 2 times. NewEgg isn't as cheap as it used to be, but customer service is beyond the call of duty.

30-December-05, 04:50 PM		#3 (permalink)
Sparky Apex Tech God	Not so bad......Your gonna have to mod it though Just get some regular old super adhesive, like super glue or something. Glue it back together and sand it flat where you glued. Get some bondo and fill in any cracks that are left. Let dry, and sand flat again. Primer, Paint, and Pimp. Best thing about this is you got your cash back and a free case

30-December-05, 05:05 PM		#5 (permalink)
Sparky Apex Tech God	Get some acrylic tubing and mount it in its place, then screw a hole threw your case and screw it on. Simple fix bro. You could also punch it, or give it a good slap.

30-December-05, 05:05 PM		#6 (permalink)
beachbum86 Apex Tech God	ship it to me.... ill find a use for it...thos are just minor problems. when modding a case, it usually looks broken before its finished anyway.

31-December-05, 12:49 AM		#8 (permalink)
Nerdz Sir Knight of Spamalot	Save the case, its probably Fedex or UPS that messed up. We had that happen and they gave us another case for free.

31-December-05, 01:24 AM		#9 (permalink)
KiwiFlavor Apex Tech Fanatic	yeah i can keep the case xD btw what's a good plastic glue??

31-December-05, 11:32 AM		#10 (permalink)
KiwiFlavor Apex Tech Fanatic	a lil bump.. oh and with what grit should i sand the bondo with? thanks

31-December-05, 12:49 PM		#11 (permalink)
RBIEZE Apex Tech Demi-God	Heres a link for all types of plastic adhesives http://www.ipscorp.com/ind_html/index.shtml

31-December-05, 12:55 PM		#12 (permalink)
KiwiFlavor Apex Tech Fanatic	oh thanks btw what's the material of computer front covers? i know it's plastic, but. is it ABS? or wutever? lol

31-December-05, 01:04 PM		#13 (permalink)
Kratos Apex Tech Fanatic Supreme	If you want to take a chance, you could use some of the hobby glue that you'd usually use with model kits. It's made for bonding all pastic surfaces.

31-December-05, 01:28 PM		#14 (permalink)
RBIEZE Apex Tech Demi-God	Well you could try Plastruct plastic weld ,it covers many types of plastics . Personally Id find out what kind of plastic the bezal is made of and use one of the adhesives made specifically for it. Did you look up your case?it probably says what its made from . heres the link for plastruct http://www.plastruct.com/Pages/Hobby.html

31-December-05, 04:10 PM		#15 (permalink)
KiwiFlavor Apex Tech Fanatic	hey thanks man.. i went to home depot and bought a super glue.. and it works like a wonder YAYAYAY !

31-December-05, 05:02 PM		#16 (permalink)
luckybob Apex Master Tech Apprentice	OK let me get this straight. 1. you chew out newegg for something that broke in shipping... 2. newegg says "ok fine" and sends you a new one free of charge. how can you complain about this? seriously? ups broke it! bitch to them! hells bells, i HATE ups. they have lost more stuff than usps or fedex combined. I had a server once. a 6U rackmout, it weighed 125 pounds. and somehow they "lost" it. and the "problems" you had were easily fixed. newegg got the short end of the stick. and the least you can do is tell them tanks for handleing the situation quickly and professionally even though it was upsor the manufacturer's fault.

01-January-06, 01:31 AM		#17 (permalink)
KiwiFlavor Apex Tech Fanatic	yeah i know.. im sorry, i was so upset !! sigh im gonna try to control myself ! (new year resolution) lol but yeah i better apologize and say thanks to them

04-January-06, 06:17 PM		#18 (permalink)
ncgchlct Apex Master Tech Apprentice	you should consider yourself lucky if anything