Case cooler

Stormeren · 19-August-05, 05:50 AM

Hey Modders.
I have just finished my latest item.This is a case cooler that you place in the buttom of your case, and it will help cooling fx a passive cooled graphics card, or just helping circulate the air insite the case.
It will run on 7 and 12 volts, and you can angle it in several directions. What do you think about it.
http://www.stormeren.dk/article_view.php?id=68

Here you can see how it works.
http://www.stormeren.dk/files/finalcooler.avi

Seikatsu · 19-August-05, 01:28 PM

That does sound useful. But the applications I'd like to use it would be limited by the vibration it'd suffer.
Hmm. Plasti-dip (Vinyl Paint) will fix that.

For a new model, perhaps you could create one of a duct type? The best type of application I see for that type item would be mounting on top of blowhole. A smaller hole could be cut into the case, one for a 60mm instead of a 120 could be made.
And for sound considerations, make it double-paned and place some paxmate between the layers.

FunkyFresh · 19-August-05, 01:38 PM

Actually, with the aluminum fan it could be a pretty attractive desktop item. Especially with people having those metal-and-glass desks nowadays. Would just have to have a power source...

Very cool.

LwrS10 · 19-August-05, 01:58 PM

nice little design there man.....id buy one from ya.....

Stormeren · 19-August-05, 02:03 PM

Quote:

Originally Posted by LwrS10


	nice little design there man.....id buy one from ya.....

hehe, what would you give..... it have cost me 16$ each to make..... it's a little bit expensive to buy stof in Denmark.

LwrS10 · 19-August-05, 02:21 PM

Quote:

Originally Posted by Stormeren


	hehe, what would you give..... it have cost me 16$ each to make..... it's a little bit expensive to buy stof in Denmark.

well the shipping to the States would be more than what you would charge-----but if i lived in denmark, i would definatly buy one....

THRASHER2 · 19-August-05, 03:11 PM

Sweeet work on the Fan Plexi-Stand..............

Nerdz · 19-August-05, 03:56 PM

Or you could put it on your desk and use it as a fan to cool yourself off with..

Stormeren · 19-August-05, 04:17 PM

Quote:

Originally Posted by Nerdz


	Or you could put it on your desk and use it as a fan to cool yourself off with..

Easy enough. You just make a 3 foot long cable with a molex pin in every end, and use that as an extender from the PSU insite the case, to the casecooler.

19-August-05, 05:50 AM		#1 (permalink)
Stormeren Apex Techie Lite	Case cooler Hey Modders. I have just finished my latest item.This is a case cooler that you place in the buttom of your case, and it will help cooling fx a passive cooled graphics card, or just helping circulate the air insite the case. It will run on 7 and 12 volts, and you can angle it in several directions. What do you think about it. http://www.stormeren.dk/article_view.php?id=68 Here you can see how it works. http://www.stormeren.dk/files/finalcooler.avi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cooler Master ATX Mid-Tower Case $49	BeetleMan	Deals and Steals	0	13-May-07 11:13 AM
Cooler Master Black Mystique Atx Case $29.99	BeetleMan	Deals and Steals	3	30-April-07 12:21 AM
Cooler Master Case Centurion Case $40	THRASHER2	Deals and Steals	0	04-December-06 06:02 PM
Review: Cooler Master Mystique 631 ATX Case	GlitterKill	PC Apex Review / Article Feedback	6	18-June-06 11:56 AM
Awsome new case by Cooler Master	ranger1033	Deals and Steals	4	02-September-05 11:14 PM

19-August-05, 01:28 PM		#2 (permalink)
Seikatsu Apex Master Tech Apprentice	That does sound useful. But the applications I'd like to use it would be limited by the vibration it'd suffer. Hmm. Plasti-dip (Vinyl Paint) will fix that. For a new model, perhaps you could create one of a duct type? The best type of application I see for that type item would be mounting on top of blowhole. A smaller hole could be cut into the case, one for a 60mm instead of a 120 could be made. And for sound considerations, make it double-paned and place some paxmate between the layers.

19-August-05, 01:38 PM		#3 (permalink)
FunkyFresh 'Da Doctor of Funk	Actually, with the aluminum fan it could be a pretty attractive desktop item. Especially with people having those metal-and-glass desks nowadays. Would just have to have a power source... Very cool.

19-August-05, 01:58 PM		#4 (permalink)
LwrS10 C-hoe-bra Joe	nice little design there man.....id buy one from ya.....

19-August-05, 03:11 PM		#7 (permalink)
THRASHER2 PCApex Newscaster	Sweeet work on the Fan Plexi-Stand..............

19-August-05, 03:56 PM		#8 (permalink)
Nerdz Sir Knight of Spamalot	Or you could put it on your desk and use it as a fan to cool yourself off with..