Need help with aria PSU

MrSniffles · 13-August-05, 11:06 PM

I have an aria case and well the cooling in it is a joke. The first thing in it i wanna mod is the PSU fan. But it has 2 connections, one like the one for vid card fans and one that leaves the PSU case connects to the MoBo (both sets of wires are comming out of the fan BTW). So if i just solder a small 2 pin (the vid card type connection) to the power cable on a nre 120mm can I should be all set right??? Or do i need to so something about the other connection??

Please help the case is all apart and i want to get it back together soon!!

Thanks
Sniff

WDoG · 14-August-05, 02:10 AM

it will work fine to solder those 2 small wires to the other fan power. The other wire, the one going into your mobo, is most likely just a fan speed sensor, dont really need to mess with that. any other cooling questions?

p.s. make sure that the red wire is soldered to the red one and the black to the black

13-August-05, 11:06 PM		#1 (permalink)
MrSniffles Apex Advanced Techie	Need help with aria PSU I have an aria case and well the cooling in it is a joke. The first thing in it i wanna mod is the PSU fan. But it has 2 connections, one like the one for vid card fans and one that leaves the PSU case connects to the MoBo (both sets of wires are comming out of the fan BTW). So if i just solder a small 2 pin (the vid card type connection) to the power cable on a nre 120mm can I should be all set right??? Or do i need to so something about the other connection?? Please help the case is all apart and i want to get it back together soon!! Thanks Sniff

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New GPU in Antec Aria	Svend	Video Card OC	2	24-January-07 03:28 AM
Project: ARIA	lord_tris	Project Worklogs	105	21-October-05 12:17 PM
Aria Watercooling mod	Zer0G	Project Worklogs	24	30-September-05 07:55 AM
To mod an Aria...	MoonshineJack	Case Modding	4	27-June-05 07:24 PM
Antec Aria mod	rockermonki	Case Modding	10	09-June-05 02:04 AM

14-August-05, 02:10 AM		#2 (permalink)
WDoG Apex Elite Tech	it will work fine to solder those 2 small wires to the other fan power. The other wire, the one going into your mobo, is most likely just a fan speed sensor, dont really need to mess with that. any other cooling questions? p.s. make sure that the red wire is soldered to the red one and the black to the black