The Samurai case project

THRASHER2 · 07-March-05, 06:10 PM

It has been a while since a worked on my Mod........
This is the last pictures that I had....

I install some switches,lights and the fans....
Updating pictures sooon...........

@#!%$* Those bitches RaidMax Stole my design....!(I should had trademarked it)
http://www.newegg.com/app/viewproduc...156-173&DEPA=1

THRASHER2 · 08-March-05, 09:38 PM

Heres the pic of the front Crown piece off...

THRASHER2 · 11-March-05, 09:03 PM

Here is the side panel off...

Spectrum · 11-March-05, 09:24 PM

Looks like a premod, even with your mods. That's good. Mods flow and look professional. Unsuprising that Raidmax makes it with a window now lol.

THRASHER2 · 12-March-05, 01:35 AM

Quote:

Originally Posted by Spectrum


	Looks like a premod, even with your mods. That's good. Mods flow and look professional. Unsuprising that Raidmax makes it with a window now lol.

Raidmax...Must be spying on PimpRig.com for ideas....Lol!

Anywho...I made my Raidmax with Two windows....Lets see them try that!

THRASHER2 · 12-March-05, 01:37 AM

Installed the motherboard and CPU....(W/Modded CPU cooler)

Dreyco · 19-March-05, 06:39 PM

How did you get your cuts so nice? What did you use?

For my panel I'll prolly be using a jigsaw, dremel, and lots of files. Any suggestions other than patenience?

RAA_Kr1cH · 20-March-05, 12:01 AM

Love the window! Awesome design, very original!

THRASHER2 · 20-March-05, 01:59 AM

Quote:

Originally Posted by Dreyco


	How did you get your cuts so nice? What did you use? For my panel I'll prolly be using a jigsaw, dremel, and lots of files. Any suggestions other than patenience?

I free hand the design of the Cut on the outer panel (Plastic panel) Took about a day to cut.
After that i out lined the window cut through the plastic piece onto the Metal panel. Took about a day !
Screwed the pieces back togetrher and it looked Sweeet. (3D lookin')
I than looked at the panels and adjusted my cuts and sanding, Filing (round files and square files) and alot of Sweat.....
I should have took some pictures...Dam!

07-March-05, 06:10 PM		#1 (permalink)
THRASHER2 PCApex Newscaster	The Samurai case project It has been a while since a worked on my Mod........ This is the last pictures that I had.... I install some switches,lights and the fans.... *Updating pictures sooon...........* @#!%$* Those bitches RaidMax Stole my design....!(I should had trademarked it) http://www.newegg.com/app/viewproduc...156-173&DEPA=1 Last edited by THRASHER2; 12-March-05 at 01:43 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FrozenCPU // RaidMax Samurai XE 901 Gaming Case w/ FREE LogitechÂ® Keyboard - BLACK	Gizmo	Vendor News RSS	0	03-November-05 05:02 PM
FrozenCPU // SunBeam Samurai Case - BLACK	Gizmo	Vendor News RSS	0	26-January-05 11:49 PM
FrozenCPU // SunBeam Samurai Case - SILVER	Gizmo	Vendor News RSS	0	26-January-05 11:49 PM
FrozenCPU // SunBeam Samurai Case - RED	Gizmo	Vendor News RSS	0	26-January-05 11:49 PM
Samurai Case	Din	Painting	10	07-April-03 09:48 PM

08-March-05, 09:38 PM		#2 (permalink)
THRASHER2 PCApex Newscaster	Heres the pic of the front Crown piece off...

11-March-05, 09:03 PM		#3 (permalink)
THRASHER2 PCApex Newscaster	Here is the side panel off...

11-March-05, 09:24 PM		#4 (permalink)
Spectrum Former GameApex Editor	Looks like a premod, even with your mods. That's good. Mods flow and look professional. Unsuprising that Raidmax makes it with a window now lol.

12-March-05, 01:37 AM		#6 (permalink)
THRASHER2 PCApex Newscaster	Installed the motherboard and CPU....(W/Modded CPU cooler)

19-March-05, 06:39 PM		#7 (permalink)
Dreyco PCApex's Mac Man	How did you get your cuts so nice? What did you use? For my panel I'll prolly be using a jigsaw, dremel, and lots of files. Any suggestions other than patenience?

20-March-05, 12:01 AM		#8 (permalink)
RAA_Kr1cH Apex Master Tech	Love the window! Awesome design, very original!