caffeine vend0r

matrixboy · 22-August-02, 12:49 PM

sorry about the crappy pic i made in MS paint

i wanna build this case.
theres buttons on the front to choose the type of pop you want
and theres fans to keep the pop cool.
this case a good idea ?
i need ideas to make it better plz

if the pic doesnt show up right click on it and choose show picture or go here http://www.geocities.com/matrixboyh/111.html

putwig · 22-August-02, 01:38 PM

clever concept. fans will not, however, keep your pop cold. It will stay at room temperature. You might be ok with that!

Hgoale · 22-August-02, 01:47 PM

You could compartments on either side of those cans and fill them with icecubes. You'd obviously have to replace them quite often and make sure it's water proof. This is a simple way out of course, the more efficient way would be to use some kind of coolant system via a mini fridge.

Miststlkr · 22-August-02, 02:14 PM

or replace the fans with a peltier

Amatsu · 22-August-02, 02:14 PM

I am in love with the concept, but I think it'd be a drag to have to take the side paneloff. Maybe a fold out slot in the front to drop more in. As for a cooling system, neather fans, nor water cooling will do it... Like Hgoale said, you'd eather have to fill the sides with ice (Talk about major side panel removal issues there

). If you're going to pursue it though, go with the minifridge idea. Just don't forget condensation

Talk about a water-cooled pc

Har Har pun.

matrixboy · 22-August-02, 02:16 PM

after looking at the design i realized that there would be a problem with all the cans falling out when the door opened. Unless there was a way to push the door back up after one can fell out. sooo i decided to do this

if pic doesnt show up try this link
http://www.geocities.com/matrixboyh/ut2.html

Miststlkr · 22-August-02, 02:18 PM

neither of your pix show man. geocities will not allow remote hosting. get a free site with Tripod.Ca. they work.

Hgoale · 22-August-02, 03:06 PM

You'd have to setup a motor to start to move that level. You're idea will work to catch the above cans, however, how are you planning to hook up with a button push to start the motor? Motor setup would be the next big thing, but keeping them cool will be the hardest part, so you'll have to look into that before even building the thing.

Kenny · 22-August-02, 03:42 PM

i picked up on you calling it pop...down here (fla) its called coke no matter what brand it is

is it different here or there or everywhere

scapegoat · 22-August-02, 07:02 PM

thats how it's here in Texas, its always called coke, no matter what brand......i know that when i go visit Minnesota(for family), they call it Pop up their, Dialects are funny arent they

Potato Joe · 22-August-02, 07:24 PM

It's kinda like in the movie "Clerks" which is funny as hell buy the way (even if it is B&W), everytime someone came in the store to buy cigarettes, they would always just ask for a pack of "smokes". Here in Nevada and in Utah too it seems it's "Soda" or "Soda Pop"...... hmm

Hgoale · 22-August-02, 09:19 PM

Here in new york it seems everyone calls it soda. If you dare call it pop you are flamed endlessly

Miststlkr · 22-August-02, 09:53 PM

Heh. I'm from NY and live in Fl now, i still flame them for calling it pop

Digital-World · 22-August-02, 10:20 PM

An Idea strikes me.

Dimensions: 33"H x 30"W x 22"D
Not a lan box but fun for a permanent desk case.

DW and wow cooled too. Seal the mobo from condesation and this could be a very cool project.
DW

Kleiner · 22-August-02, 11:44 PM

Sweet idea, however why not get a (soda, pop, soda-pop, coke) dispenser and put the computer into that? I realize it would be a lot less work and less do it yourself, however, atleast it would work. Yea, I live in Minnesota and everyone calls it pop. I guess, I don't worry about it because I don't drink it. GOoD LuCk!

DeeChan · 22-August-02, 11:44 PM

Yeah NY is tough if you call soda, pop, cuz people call you a crazy canadian (people from canada call it popas far as i know)

ANYWAYS......
I think your design for an integrated soda machine is very genius and i bet it'll turn out fine. who wouldn't like caffeine while play WC3 all night?

BigAkita · 22-August-02, 11:46 PM

Seems that Wixx's project has everybody enthusiastic about radical modz. Cool. My next will be conventional, but classy.

By the way....we don't call it soda, pop, or coke here. We say "give me a beer."

scapegoat · 23-August-02, 12:43 AM

Quote:


	Originally posted by bigakita By the way....we don't call it soda, pop, or coke here. We say "give me a beer."

Here, Here! BA, just keep your hand off my Heine!!

BigAkita · 23-August-02, 12:49 AM

I hope you weren't making an anotomical reference there. Either way, no problem.

Kleiner · 23-August-02, 03:22 AM

LOL good call scapegoat. Peace!~

22-August-02, 12:49 PM		#1 (permalink)
matrixboy Apex Techie I	caffeine vend0r sorry about the crappy pic i made in MS paint i wanna build this case. theres buttons on the front to choose the type of pop you want and theres fans to keep the pop cool. this case a good idea ? i need ideas to make it better plz if the pic doesnt show up right click on it and choose show picture or go here http://www.geocities.com/matrixboyh/111.html Last edited by matrixboy; 22-August-02 at 02:27 PM..

22-August-02, 02:16 PM		#6 (permalink)
matrixboy Apex Techie I	after looking at the design i realized that there would be a problem with all the cans falling out when the door opened. Unless there was a way to push the door back up after one can fell out. sooo i decided to do this if pic doesnt show up try this link http://www.geocities.com/matrixboyh/ut2.html Last edited by matrixboy; 22-August-02 at 02:28 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Death By caffeine	eascarface	Anything Goes	23	20-October-06 11:39 PM
Caffeine Database	eascarface	Anything Goes	9	26-June-06 09:48 PM
Death by caffeine	corruptjoker	Anything Goes	2	20-August-05 05:53 PM
FrozenCPU // New High Caffeine Coffee (40 - 50% Higher Caffeine Levels)	Gizmo	Vendor News RSS	0	23-December-04 03:07 PM
Caffeine... How could you?!?	Darksamurai	Anything Goes	38	09-June-03 01:17 PM

22-August-02, 01:38 PM		#2 (permalink)
putwig Dr. Hydro Pimp	clever concept. fans will not, however, keep your pop cold. It will stay at room temperature. You might be ok with that!

22-August-02, 01:47 PM		#3 (permalink)
Hgoale Apex Master Tech	You could compartments on either side of those cans and fill them with icecubes. You'd obviously have to replace them quite often and make sure it's water proof. This is a simple way out of course, the more efficient way would be to use some kind of coolant system via a mini fridge.

22-August-02, 02:14 PM		#4 (permalink)
Miststlkr Incognit - Hoe	or replace the fans with a peltier

22-August-02, 02:14 PM		#5 (permalink)
Amatsu Apex Techie I	I am in love with the concept, but I think it'd be a drag to have to take the side paneloff. Maybe a fold out slot in the front to drop more in. As for a cooling system, neather fans, nor water cooling will do it... Like Hgoale said, you'd eather have to fill the sides with ice (Talk about major side panel removal issues there ). If you're going to pursue it though, go with the minifridge idea. Just don't forget condensation Talk about a water-cooled pc Har Har pun.

22-August-02, 02:18 PM		#7 (permalink)
Miststlkr Incognit - Hoe	neither of your pix show man. geocities will not allow remote hosting. get a free site with Tripod.Ca. they work.

22-August-02, 03:06 PM		#8 (permalink)
Hgoale Apex Master Tech	You'd have to setup a motor to start to move that level. You're idea will work to catch the above cans, however, how are you planning to hook up with a button push to start the motor? Motor setup would be the next big thing, but keeping them cool will be the hardest part, so you'll have to look into that before even building the thing.

22-August-02, 03:42 PM		#9 (permalink)
Kenny Whack-Hoe	i picked up on you calling it pop...down here (fla) its called coke no matter what brand it is is it different here or there or everywhere

22-August-02, 07:02 PM		#10 (permalink)
scapegoat Apex Tech God	thats how it's here in Texas, its always called coke, no matter what brand......i know that when i go visit Minnesota(for family), they call it Pop up their, Dialects are funny arent they

22-August-02, 07:24 PM		#11 (permalink)
Potato Joe Potat-Hoe	It's kinda like in the movie "Clerks" which is funny as hell buy the way (even if it is B&W), everytime someone came in the store to buy cigarettes, they would always just ask for a pack of "smokes". Here in Nevada and in Utah too it seems it's "Soda" or "Soda Pop"...... hmm

22-August-02, 09:19 PM		#12 (permalink)
Hgoale Apex Master Tech	Here in new york it seems everyone calls it soda. If you dare call it pop you are flamed endlessly

22-August-02, 09:53 PM		#13 (permalink)
Miststlkr Incognit - Hoe	Heh. I'm from NY and live in Fl now, i still flame them for calling it pop

22-August-02, 10:20 PM		#14 (permalink)
Digital-World Old Skool Pimp	An Idea strikes me. Dimensions: 33"H x 30"W x 22"D Not a lan box but fun for a permanent desk case. DW and wow cooled too. Seal the mobo from condesation and this could be a very cool project. DW

22-August-02, 11:44 PM		#15 (permalink)
Kleiner Apex Techie II	Sweet idea, however why not get a (soda, pop, soda-pop, coke) dispenser and put the computer into that? I realize it would be a lot less work and less do it yourself, however, atleast it would work. Yea, I live in Minnesota and everyone calls it pop. I guess, I don't worry about it because I don't drink it. GOoD LuCk!

22-August-02, 11:44 PM		#16 (permalink)
DeeChan Apex Techie I	Yeah NY is tough if you call soda, pop, cuz people call you a crazy canadian (people from canada call it popas far as i know) ANYWAYS...... I think your design for an integrated soda machine is very genius and i bet it'll turn out fine. who wouldn't like caffeine while play WC3 all night?

22-August-02, 11:46 PM		#17 (permalink)
BigAkita n00b-ass reviewer	Seems that Wixx's project has everybody enthusiastic about radical modz. Cool. My next will be conventional, but classy. By the way....we don't call it soda, pop, or coke here. We say "give me a beer."

23-August-02, 12:49 AM		#19 (permalink)
BigAkita n00b-ass reviewer	I hope you weren't making an anotomical reference there. Either way, no problem.

23-August-02, 03:22 AM		#20 (permalink)
Kleiner Apex Techie II	LOL good call scapegoat. Peace!~