Santa came to town early and...

FeRaL · 23-December-02, 02:56 AM

he gave me a sweet gift. A Dremel Multi Pro Model 395 with an additional tungsten carbide cutter bit!!!

I didn't even ask for a Dremel and I got one from my mom and step dad at his side of the families Christmas gathering. I'm so happy.

Maverick · 23-December-02, 03:12 AM

That rules man. Im getting ready to break my old dremel out for my first case mod. I used it when i used to mod my golf clubs. Taking the finish off for paiting or doing the swirlly pattern.

scapegoat · 23-December-02, 04:02 AM

nice ferel :d ya had better put that to some good use

IronSerif · 23-December-02, 12:54 PM

Glad to hear you got something you like man, and early too

Enjoy it!

FeRaL · 23-December-02, 01:23 PM

Thanks guys! scapegoat, I'm gonna try...

mnpctech · 23-December-02, 01:24 PM

Congrats, now go have some fun!

btw: Unless you got these also, get yourself the "reinforced" cutting discs for making your windows cut-outs. Home depot sells them

Must of all.....

WEAR SAFETY GOGGLES!!!!!!!!!

G Money · 24-December-02, 12:53 AM

I got the Dremel MultiPro 4950-02 for about $60 at Wal-Mart. That thing rocks. I used up 3 reinforced discs on a 12x12 window

IronSerif · 24-December-02, 12:36 PM

Quote:


	Originally posted by mnpctech_guy Must of all..... WEAR SAFETY GOGGLES!!!!!!!!!

Amen! Safety first, in all situations!

trenchcoatangel · 25-December-02, 01:31 AM

Quote:


	Originally posted by mnpctech_guy [ Must of all..... WEAR SAFETY GOGGLES!!!!!!!!! [/B]

Amen to that,

listen to the man I know this from experiance, just this last tuesday I had to go to the emergency room (after a full night of pain cuz I didn't know what it was) because I got a metal shard in my eye from cutting my modo tray. They took it out at the hospital, then sent me to the optomitrist to get the RUST STAIN in my cornea buffed out, I knew what it was like to be blind for a couple days cuz it was sooo painful to open my eyes.

But luckiliy , better now,

even if you think it's just gonna be a quick zip, SAFTEY GOGGLES

piscikeeper · 25-December-02, 01:49 AM

mnpctech,what's the story behind the new avatar?look's like some sweet tribal work.
trenchcoatangel, did you get to watch the ceiling ripple when the optometrist "modded" your eye with his "dremel"?i went through the same thing a couple years ago when the clutch on a chainsaw detonated.
and i WAS wearing saftey glasses.

G Money · 25-December-02, 02:00 AM

Even a pair of good Oakley's or motorcycle glasses would help protect your eyes.

Kage · 25-December-02, 01:55 PM

w00t!! I got a dremel multi-pro too!!! =) And I actually waited for Christmas! Heh, I'll take your tips on wearing safety goggles, eyes are just too important to be careless about

edit: It's a Multi-Pro 3966-02 btw

23-December-02, 02:56 AM		#1 (permalink)
FeRaL Mutant Moderator	Santa came to town early and... he gave me a sweet gift. A Dremel Multi Pro Model 395 with an additional tungsten carbide cutter bit!!! I didn't even ask for a Dremel and I got one from my mom and step dad at his side of the families Christmas gathering. I'm so happy.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
There's a new PW in town...	Twizted	Anything Goes	21	31-July-06 02:52 AM
Ars Technica // Early problems for early e-voting	Gizmo	Ars Technica RSS	0	18-October-04 09:43 PM
Santa clause is pimping in town	floatingtrem	Graphics / Media	7	07-December-03 04:30 AM
The new GPU-s in town	Lokie	PC Apex Web News	0	04-November-03 08:39 PM

23-December-02, 03:12 AM		#2 (permalink)
Maverick Apex Elite Expert Tech	That rules man. Im getting ready to break my old dremel out for my first case mod. I used it when i used to mod my golf clubs. Taking the finish off for paiting or doing the swirlly pattern.

23-December-02, 04:02 AM		#3 (permalink)
scapegoat Apex Tech God	nice ferel :d ya had better put that to some good use

23-December-02, 12:54 PM		#4 (permalink)
IronSerif Lead Pimp Writer? Hell Yeah!	Glad to hear you got something you like man, and early too Enjoy it!

23-December-02, 01:23 PM		#5 (permalink)
FeRaL Mutant Moderator	Thanks guys! scapegoat, I'm gonna try...

23-December-02, 01:24 PM		#6 (permalink)
mnpctech Case Modding Guru	Congrats, now go have some fun! btw: Unless you got these also, get yourself the "reinforced" cutting discs for making your windows cut-outs. Home depot sells them Must of all..... WEAR SAFETY GOGGLES!!!!!!!!!

24-December-02, 12:53 AM		#7 (permalink)
G Money Fuel Hoe-lio	I got the Dremel MultiPro 4950-02 for about $60 at Wal-Mart. That thing rocks. I used up 3 reinforced discs on a 12x12 window

25-December-02, 01:49 AM		#10 (permalink)
piscikeeper Apex Tech Fanatic	mnpctech,what's the story behind the new avatar?look's like some sweet tribal work. trenchcoatangel, did you get to watch the ceiling ripple when the optometrist "modded" your eye with his "dremel"?i went through the same thing a couple years ago when the clutch on a chainsaw detonated. and i WAS wearing saftey glasses.

25-December-02, 02:00 AM		#11 (permalink)
G Money Fuel Hoe-lio	Even a pair of good Oakley's or motorcycle glasses would help protect your eyes.

25-December-02, 01:55 PM		#12 (permalink)
Kage Lokie's Personal WU-Hoe	w00t!! I got a dremel multi-pro too!!! =) And I actually waited for Christmas! Heh, I'll take your tips on wearing safety goggles, eyes are just too important to be careless about edit: It's a Multi-Pro 3966-02 btw