Amazing Temps

Spc. Forces Bob · 01-July-03, 02:40 PM

I just had to brag about this. With just 2 plain intakes and 2 plain exasausts, a sk7 heatsink witha smart fan 2, im getting 19 degrees mobo temp and mid to hight 20s for cpu under full work load in si soft sandra. i also have my cpu oc'd to 2.0(200fsbx10multiplyer) from its origanal 1.66. im very happy

putwig · 01-July-03, 04:32 PM

What is your ambient temp?

Fu3lman · 01-July-03, 04:41 PM

yo dood, update your bios and then see what it says, theres a gooood chance that that might be a mistake

ZENNZZO · 01-July-03, 05:40 PM

That's better than mine and I've got an ambient of 21.9...
you got a 0deg ambient.? in July?

...and a map I'm movin' there!
yea check it out...

domerocka · 18-July-03, 07:55 PM

I believe that. I modded my case with a duct intake to the CPU and a flush intake on the cards. I also have a 80mm exhaust in the front. I am getting 30C on the cpu full load temp with fans on high and 25c on the mobo. I am running two(2) vantec tornado's and a 80mm 46cfm fan up front for the exhaust. I am using a vantec 4 fan controller in a 5 1/4" bay. Ambient temp at my house is 70's f. Without load I am mid to high 20's on the cpu and teens on the mobo. I will take pics soon to show the mod.

ZENNZZO · 18-July-03, 08:21 PM

Welcome to pimprig domerocka. You're from my old running grounds. there's a UC campus there now.
What are you taking your temps with?

domerocka · 18-July-03, 10:42 PM

Taking temps with asus probe.

Banana Boy · 18-July-03, 11:19 PM

You should have front as intake, not exhaust man. you'll find you'll get lower temps with a nice airflow from the front to the back.

domerocka · 19-July-03, 12:18 PM

It was an intake in the beginning before I had the two tornado's. The tornado's intake so much air that the air pressure builds and exhausts itself. I am going to install a 120mm exhaust soon and pics today. Both tornado's are intakes.

01-July-03, 02:40 PM		#1 (permalink)
Spc. Forces Bob Apex Elite Expert Tech	Amazing Temps I just had to brag about this. With just 2 plain intakes and 2 plain exasausts, a sk7 heatsink witha smart fan 2, im getting 19 degrees mobo temp and mid to hight 20s for cpu under full work load in si soft sandra. i also have my cpu oc'd to 2.0(200fsbx10multiplyer) from its origanal 1.66. im very happy

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
This is amazing.	Rob	Anything Goes	9	31-October-06 03:38 AM
Amazing what a bit of cleaning (and a mod or two) can do...	markwalker84	Heatsinks / fans	21	12-May-06 07:59 PM
AMAZING prices	davidkruta	Deals and Steals	9	15-April-04 06:27 PM
Amazing 1U LAN Gaming Rig!	Joose	Case Modding	0	17-September-03 04:44 PM

01-July-03, 04:32 PM		#2 (permalink)
putwig Dr. Hydro Pimp	What is your ambient temp?

01-July-03, 04:41 PM		#3 (permalink)
Fu3lman Light My Fire	yo dood, update your bios and then see what it says, theres a gooood chance that that might be a mistake

01-July-03, 05:40 PM		#4 (permalink)
ZENNZZO Direct Cool Hoe	That's better than mine and I've got an ambient of 21.9... you got a 0deg ambient.? in July? ...and a map I'm movin' there! yea check it out...

18-July-03, 07:55 PM		#5 (permalink)
domerocka Apex Techie Wannabe	I believe that. I modded my case with a duct intake to the CPU and a flush intake on the cards. I also have a 80mm exhaust in the front. I am getting 30C on the cpu full load temp with fans on high and 25c on the mobo. I am running two(2) vantec tornado's and a 80mm 46cfm fan up front for the exhaust. I am using a vantec 4 fan controller in a 5 1/4" bay. Ambient temp at my house is 70's f. Without load I am mid to high 20's on the cpu and teens on the mobo. I will take pics soon to show the mod.

18-July-03, 08:21 PM		#6 (permalink)
ZENNZZO Direct Cool Hoe	Welcome to pimprig domerocka. You're from my old running grounds. there's a UC campus there now. What are you taking your temps with?

18-July-03, 10:42 PM		#7 (permalink)
domerocka Apex Techie Wannabe	Taking temps with asus probe.

18-July-03, 11:19 PM		#8 (permalink)
Banana Boy Apex Tech Maniac Supreme	You should have front as intake, not exhaust man. you'll find you'll get lower temps with a nice airflow from the front to the back.

19-July-03, 12:18 PM		#9 (permalink)
domerocka Apex Techie Wannabe	It was an intake in the beginning before I had the two tornado's. The tornado's intake so much air that the air pressure builds and exhausts itself. I am going to install a 120mm exhaust soon and pics today. Both tornado's are intakes.