8800GTS + 12cm Fan

SYNERGY · 24-August-07, 08:02 AM

Hi all I just got a bit bored and so did a quick little mod and placed a spare old tsunami dream case fan over my 8800GTS with a view to cool it and the HR-05 NB cooler behind it.
It does both well, the GTS no longer almost burns to the touch nor indeed does the northbridge cooler.
The fan isn't the quietest but was all I had.

The GTS used to idle at 60-62 degrees, now appears to have lowered that to 50-52.
Used to peak @ load to 72-76 degrees, early testing shows it would be hard to push it over 60 degrees.

Haven't tidied wires up yet or tried overclocking potential but tbh I would only max it at 620 core anyway.

Cheers

killert · 24-August-07, 08:09 AM

Take off the plastic piece and put fan on the heatsink, that really dropped the temps on my 8800GTX

Chrome_Rust · 24-August-07, 09:29 AM

If only i had room.... stupid SLI

SYNERGY · 25-August-07, 07:27 AM

I'm gonna replace this thermaltake fan with a 12cm vantec stealth I just realised I had, no lights but tbh my case is looking saturated with blue light as it is! On full the stealth is nicely quiet too...Any ideas how to mount the fan cos I can't think of any.
I may just have to reposition this additional fan after moving my case cos gravity otherwise keeps it nicely in place on the GPU.
The fan is raised up on toy air-bullets made from rubber and super-glued to the fan chassis

MakubeX · 30-August-07, 08:10 PM

You could place the Vantec fan on the card with the rubber air-bullets, just like the Thermaltake fan, and then hold it in place with zip ties or some type of string. Have the zip ties or string go around the card and through the fan's screw holes, or just around the fan. Of course if you use zip ties you'll probably have to join a few of them so they can make it all the way around.

SYNERGY · 14-May-08, 06:49 AM

Quote:

Originally Posted by MakubeX


	You could place the Vantec fan on the card with the rubber air-bullets, just like the Thermaltake fan, and then hold it in place with zip ties or some type of string. Have the zip ties or string go around the card and through the fan's screw holes, or just around the fan. Of course if you use zip ties you'll probably have to join a few of them so they can make it all the way around.

I've used 4 zip-ties, twice, to secure the fan to the card now

completely solid in transportation now
maintaining nice temps still even in this summer state

24-August-07, 08:02 AM		#1 (permalink)
SYNERGY Apex Advanced Techie	8800GTS + 12cm Fan Hi all I just got a bit bored and so did a quick little mod and placed a spare old tsunami dream case fan over my 8800GTS with a view to cool it and the HR-05 NB cooler behind it. It does both well, the GTS no longer almost burns to the touch nor indeed does the northbridge cooler. The fan isn't the quietest but was all I had. The GTS used to idle at 60-62 degrees, now appears to have lowered that to 50-52. Used to peak @ load to 72-76 degrees, early testing shows it would be hard to push it over 60 degrees. Haven't tidied wires up yet or tried overclocking potential but tbh I would only max it at 620 core anyway. Cheers Attached Thumbnails

24-August-07, 08:09 AM		#2 (permalink)
killert Apex Tech God	Re: 8800GTS + 12cm Fan Take off the plastic piece and put fan on the heatsink, that really dropped the temps on my 8800GTX

24-August-07, 09:29 AM		#3 (permalink)
Chrome_Rust Apex Tech God	Re: 8800GTS + 12cm Fan If only i had room.... stupid SLI

25-August-07, 07:27 AM		#4 (permalink)
SYNERGY Apex Advanced Techie	Re: 8800GTS + 12cm Fan I'm gonna replace this thermaltake fan with a 12cm vantec stealth I just realised I had, no lights but tbh my case is looking saturated with blue light as it is! On full the stealth is nicely quiet too...Any ideas how to mount the fan cos I can't think of any. I may just have to reposition this additional fan after moving my case cos gravity otherwise keeps it nicely in place on the GPU. The fan is raised up on toy air-bullets made from rubber and super-glued to the fan chassis

30-August-07, 08:10 PM		#5 (permalink)
MakubeX Apex Techie Wannabe	Re: 8800GTS + 12cm Fan You could place the Vantec fan on the card with the rubber air-bullets, just like the Thermaltake fan, and then hold it in place with zip ties or some type of string. Have the zip ties or string go around the card and through the fan's screw holes, or just around the fan. Of course if you use zip ties you'll probably have to join a few of them so they can make it all the way around.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Affilliate Review: BFG 8800GTS OC and XFX 8800GTS XXX	ranger1033	PC Apex Web News	0	07-March-07 07:40 PM
7950GX2 vs. 8800GTS/GTX	raydub	Hardware Advice Corner	1	13-November-06 08:45 PM
12cm hole	Sir.Smoke.Alot	Anything Goes	15	05-December-05 05:26 PM
Thermaltake BigWater 12cm Liquid Cooling System	PhatPat000	Extreme Cooling	5	26-April-05 10:28 PM
FrozenCPU // Thermaltake 12cm Big Radiator (Fits All Tubing) [CL-W0002]	Gizmo	Vendor News RSS	0	25-January-05 11:49 PM

LinkBacks (?) LinkBack to this Thread: http://www.forumapex.com/case_cooling/112952-8800gts_12cm_fan.html
Posted By	For	Type	Date
Heat.... - Overclockers UK Forums	This thread	Refback	14-May-08 07:07 AM
Heat.... - Overclockers UK Forums	This thread	Refback	14-May-08 06:48 AM