Stop! Download This Now

Fu3lman · 07-January-04, 01:03 AM

i cant believe i never knew this existed....everything from fan controlling to S.M.A.R.T. polling to cpu and system temperature, fan graphs and even overclocking for certain mobos all in one application....you owe it to yourself to download this thing right now!!!

http://www.webattack.com/download/dlspeedfan.html

JimsZR2 · 07-January-04, 01:20 AM

I take it the program can be used on any Mobo? sorry, i dont know much about overclocking yet, its a new thing to me.

hawklen · 07-January-04, 02:11 AM

It can, or fu3l would of said differently.

Im going to give it a shot

m3_tw0 · 07-January-04, 02:45 AM

Pretty sweet prog..fan control thign doesnt do anythin for me since all my shtis connected to a fan controller..also the ocin part of the prog is more difficult to use then lets say clockgen..cool find tho.

Evil3lf · 07-January-04, 02:49 AM

I must say... VERY PIMP

aaronrkelly · 07-January-04, 02:50 AM

I have used this before - good program with support for almost any chipset. Never played with the OC part of the program though. I like the ability to control the fans....

$SOLID$ Necro · 07-January-04, 03:43 AM

Quote:

Originally Posted by hawklen


	It can, or fu3l would of said differently. Im going to give it a shot

Re-read his post, unfortunately he says it has support for Overclocking on "Certain" motherboards only....

Damn..And I got all exited, I have been trying to find a more universal version, that might work on more boards than Clock Gen does.
I realy hate changing jumpers on old motherboards

Good find though, It has a lot more options than Clock Gen, Does it allow you to change things to do with the hard drive, or just gives you speed ratings like HD tach?

I bookmarked it to check out later

aaronrkelly · 07-January-04, 04:05 AM

Unless the new version is any diff then the one I have it will only give you the SMART info and drive temps.....

jinxÂ© · 07-January-04, 04:06 AM

Sounds cool Fu3l...Going to give it a look later myself.

Fu3lman · 07-January-04, 03:39 PM

BUMP for the daywalkers, and for some clarification....it does not work on all motherboards....i know this because it wont work with mine either (not supported in the list)...BUT the reason i thought it would be interesting for alot of you is that its a no nonsense, bonafide system monitoring utility without any cuteness or nagness or spyness, and you can leave it running in the bg without it using much resources...

but believe me, if anyone out there can find something better and does everything this does, plz let me know and ill be the first in line....

me_john85 · 07-January-04, 04:21 PM

cool find fu3l

hawklen · 07-January-04, 08:02 PM

Pretty nifty program, heres my temps and rails according to that program.

vladimir · 07-January-04, 08:25 PM

i knew about this prog for a while pretty nifty! good for testing stability and how far can u go..on some mobos

heres the creators site: http://www.almico.com/speedfan.php

hawklen · 13-January-04, 09:42 AM

Bump...since fu3ls, er, unavailable (That thumping in my trunk? Uh, er, its just the tire jack! (whew) )

Well, switching to my Abit NF7-S rev 2 board, that proggy doesnt reconize it, lol.

talem · 13-January-04, 10:22 AM

does it read the videocard temp?

hawklen · 13-January-04, 10:51 AM

Quote:

Originally Posted by talem


	does it read the videocard temp?

Im not sure, since I dont have a video card with a temp sensor on it. If you have a video card with one, try it.

nightfox_pc_asst · 14-January-04, 04:09 AM

Well I can say that mine, NF-7s isnt supported either however those that are under Abit are:

BP6
KT7A
KT7A-RAID

I dont have time to list all the boards...and on another note..It doesnt reconginze the speed of my two antec fans located at PWR connector and Chassis connector on the abit mobo..??

Weird..It also says that Temp 3 is a cool -48*C??

Oh well Im sure its just need to be coded in or something.

swanny321 · 14-January-04, 08:16 AM

excellent find

07-January-04, 01:03 AM		#1 (permalink)
Fu3lman Light My Fire	Stop! Download This Now i cant believe i never knew this existed....everything from fan controlling to S.M.A.R.T. polling to cpu and system temperature, fan graphs and even overclocking for certain mobos all in one application....you owe it to yourself to download this thing right now!!! http://www.webattack.com/download/dlspeedfan.html Attached Thumbnails Last edited by Fu3lman; 07-January-04 at 01:08 AM..

07-January-04, 08:02 PM		#12 (permalink)
hawklen PCApex's Mouthy Stepchild	Pretty nifty program, heres my temps and rails according to that program. Attached Thumbnails

14-January-04, 04:09 AM		#17 (permalink)
nightfox_pc_asst Apex Techie II	Abit boards supported Well I can say that mine, NF-7s isnt supported either however those that are under Abit are: BP6 KT7A KT7A-RAID I dont have time to list all the boards...and on another note..It doesnt reconginze the speed of my two antec fans located at PWR connector and Chassis connector on the abit mobo..?? Weird..It also says that Temp 3 is a cool -48*C?? Oh well Im sure its just need to be coded in or something.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ars Technica // Download services stuck between CSS and a hard place; no download-to-	Gizmo	Ars Technica RSS	0	15-May-07 12:41 AM
How to stop keyloggers?	nico25	Spam Trash Can	9	04-April-07 06:07 PM
STOP using AIM	Seyeklopz	Anything Goes	9	14-March-05 10:26 PM
Please, Make It Stop!	Anathema	Daily Disturbance	4	05-August-04 09:26 PM

07-January-04, 01:20 AM		#2 (permalink)
JimsZR2 Apex Elite Expert Tech	I take it the program can be used on any Mobo? sorry, i dont know much about overclocking yet, its a new thing to me.

07-January-04, 02:11 AM		#3 (permalink)
hawklen PCApex's Mouthy Stepchild	It can, or fu3l would of said differently. Im going to give it a shot

07-January-04, 02:45 AM		#4 (permalink)
m3_tw0 Apex Tech Fanatic Supreme	Pretty sweet prog..fan control thign doesnt do anythin for me since all my shtis connected to a fan controller..also the ocin part of the prog is more difficult to use then lets say clockgen..cool find tho.

07-January-04, 02:49 AM		#5 (permalink)
Evil3lf Lokie's Elf of Evil	I must say... VERY PIMP

07-January-04, 02:50 AM		#6 (permalink)
aaronrkelly Apex Tech God	I have used this before - good program with support for almost any chipset. Never played with the OC part of the program though. I like the ability to control the fans....

07-January-04, 04:05 AM		#8 (permalink)
aaronrkelly Apex Tech God	Unless the new version is any diff then the one I have it will only give you the SMART info and drive temps.....

07-January-04, 04:06 AM		#9 (permalink)
jinxÂ© Still Duck's Hoe Though	Sounds cool Fu3l...Going to give it a look later myself.

07-January-04, 03:39 PM		#10 (permalink)
Fu3lman Light My Fire	BUMP for the daywalkers, and for some clarification....it does not work on all motherboards....i know this because it wont work with mine either (not supported in the list)...BUT the reason i thought it would be interesting for alot of you is that its a no nonsense, bonafide system monitoring utility without any cuteness or nagness or spyness, and you can leave it running in the bg without it using much resources... but believe me, if anyone out there can find something better and does everything this does, plz let me know and ill be the first in line....

07-January-04, 04:21 PM		#11 (permalink)
me_john85 Camp Pen-Hoe-tan's Hoe	cool find fu3l

07-January-04, 08:25 PM		#13 (permalink)
vladimir Pimp PHP Pro	i knew about this prog for a while pretty nifty! good for testing stability and how far can u go..on some mobos heres the creators site: http://www.almico.com/speedfan.php

13-January-04, 09:42 AM		#14 (permalink)
hawklen PCApex's Mouthy Stepchild	Bump...since fu3ls, er, unavailable (That thumping in my trunk? Uh, er, its just the tire jack! (whew) ) Well, switching to my Abit NF7-S rev 2 board, that proggy doesnt reconize it, lol.

13-January-04, 10:22 AM		#15 (permalink)
talem Apex Techie II	does it read the videocard temp?

14-January-04, 08:16 AM		#18 (permalink)
swanny321 Apex Tech Fanatic	excellent find