u thought u hid ur hdd cables good.

vladimir · 12-April-03, 05:58 PM

as u can see there are no cables

dont mind taht ata cable in background, its for cdroms...and going to get replaced with rounded one

figure that one out

NapalmStixToKidz · 12-April-03, 06:02 PM

very smart mounting the drives backwards...does it effect data transfer speeds??

(just kidding

)

vladimir · 12-April-03, 06:20 PM

aslong you have sum source of light surrounding, the data would find the bus at the same speed

but if u got no light, transfer speed gets very bad

Red02 · 12-April-03, 06:36 PM

LOL good stuff clown

Lokie · 12-April-03, 06:39 PM

Dam good idea clown! but if you run a clear case??

vladimir · 12-April-03, 06:48 PM

i duno abotu clear cases, but its very neat...much better then in the back..

vladimir · 12-April-03, 06:52 PM

connected to mobo

vladimir · 12-April-03, 06:55 PM

behind hdd bracket..

cables go throught a hole taht i cut with my dremel

i also had to cut off the rubber wrap of the top part of the cable

and also cut off those sleaves covering connectors itself

Buzz_4_20 · 12-April-03, 07:00 PM

good job, i'd have my cables mostly invisable, if i could oly fit my hard drive behind the mobo tray......

vladimir · 12-April-03, 11:13 PM

uh u put ur hdd on the mobo plate? nice

i bet taht looks even cleaner

can u maybe post a pic

BigAkita · 13-April-03, 01:09 AM

But damn, now all your data will be coming out of the HD backwards.

Good idea very simply implemented by any of us. I thought about doing that, but I screw with my equipment too much to keep having to pull the panels and unscrew the drive to unhook it.

With long enough ribbon cables and some prior planning, cables can be routed along the walls and drives and only show where they connect.

Not to take anything away from you Clown, you did a great job with the interior of your case.

flounder405 · 13-April-03, 08:34 AM

good one clown ..was thinking of doing that to a floppy to hide it .but then started thinking about how often i use it.never thought about the harddrive DUH.hey your unning a epox board mind if i pm ya was wanting to know about em and if i should invest in one myself

IronSerif · 13-April-03, 11:22 AM

Thats neat, and a very good idea

Never thought about it myself..however I was considering doing the "origami" style to the cables.

But I like your idea as well!

FeRaL · 14-April-03, 09:43 PM

Nice looking job there Clown

12-April-03, 05:58 PM		#1 (permalink)
vladimir Pimp PHP Pro	u thought u hid ur hdd cables good. as u can see there are no cables dont mind taht ata cable in background, its for cdroms...and going to get replaced with rounded one figure that one out Attached Thumbnails

12-April-03, 06:48 PM		#6 (permalink)
vladimir Pimp PHP Pro	i duno abotu clear cases, but its very neat...much better then in the back.. Attached Thumbnails

12-April-03, 06:52 PM		#7 (permalink)
vladimir Pimp PHP Pro	connected to mobo Attached Thumbnails

12-April-03, 06:55 PM		#8 (permalink)
vladimir Pimp PHP Pro	behind hdd bracket.. cables go throught a hole taht i cut with my dremel i also had to cut off the rubber wrap of the top part of the cable and also cut off those sleaves covering connectors itself Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-April-03, 06:02 PM		#2 (permalink)
NapalmStixToKidz DuckWarrior's Personal Quack Hoe	very smart mounting the drives backwards...does it effect data transfer speeds?? (just kidding )

12-April-03, 06:20 PM		#3 (permalink)
vladimir Pimp PHP Pro	aslong you have sum source of light surrounding, the data would find the bus at the same speed but if u got no light, transfer speed gets very bad

12-April-03, 06:36 PM		#4 (permalink)
Red02 Freck-hoe-d	LOL good stuff clown

12-April-03, 06:39 PM		#5 (permalink)
Lokie Custom What?	Dam good idea clown! but if you run a clear case??

12-April-03, 07:00 PM		#9 (permalink)
Buzz_4_20 Apex Elite Tech	good job, i'd have my cables mostly invisable, if i could oly fit my hard drive behind the mobo tray......

12-April-03, 11:13 PM		#10 (permalink)
vladimir Pimp PHP Pro	uh u put ur hdd on the mobo plate? nice i bet taht looks even cleaner can u maybe post a pic

13-April-03, 01:09 AM		#11 (permalink)
BigAkita n00b-ass reviewer	But damn, now all your data will be coming out of the HD backwards. Good idea very simply implemented by any of us. I thought about doing that, but I screw with my equipment too much to keep having to pull the panels and unscrew the drive to unhook it. With long enough ribbon cables and some prior planning, cables can be routed along the walls and drives and only show where they connect. Not to take anything away from you Clown, you did a great job with the interior of your case.

13-April-03, 08:34 AM		#12 (permalink)
flounder405 The Mack Daddy	good one clown ..was thinking of doing that to a floppy to hide it .but then started thinking about how often i use it.never thought about the harddrive DUH.hey your unning a epox board mind if i pm ya was wanting to know about em and if i should invest in one myself

13-April-03, 11:22 AM		#13 (permalink)
IronSerif Lead Pimp Writer? Hell Yeah!	Thats neat, and a very good idea Never thought about it myself..however I was considering doing the "origami" style to the cables. But I like your idea as well!

14-April-03, 09:43 PM		#14 (permalink)
FeRaL Mutant Moderator	Nice looking job there Clown

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WOW and I thought 3.45 Ghz was a good over clock!	IcEMage	Intel CPU/Motherboard OC	1	13-August-05 07:44 PM
Keep a good thought.	Computersmith	Anything Goes	8	10-May-04 12:29 AM
I thought it was all over!!	Chrome_Rust	Anything Goes	9	04-November-03 11:07 AM
Just when you thought AS3 was good enough	Buzz_4_20	Anything Goes	1	08-October-03 11:04 PM
I thought I would be on my new rig right now...	CRE	Motherboards / CPUs	4	27-December-02 02:16 AM