Help with computer problem....

phin3s · 23-August-05, 11:30 PM

so im trying to fix my sisters computer and when you load windows normally.... when its at the bootscreen it finishes and just reboots..... i load it in safe mode and get the BSOD (blue screen of death)

BSOD info
PAGE_FAULT_IN_NONPAGED_AREA

Technical Info
*** STOP 0x00000050 (0x90CCCC, 0x00000000, 0x9090CCCC, 0x00000000)

any help would be nice

im gonna try windows repair console but if you would happen to know whats wrong, it would be appreciated

Seikatsu · 23-August-05, 11:48 PM

That information is really thin.

Could you please list the system specs?

And what was happenening when it flatlined?

Prelim: try booting up with a pair of headphones connected to the onboard audio and listen closely.
The little voice may tell you what's wrong.

phin3s · 24-August-05, 12:00 AM

Quote:

Originally Posted by Seikatsu


	That information is really thin. Could you please list the system specs? And what was happenening when it flatlined? Prelim: try booting up with a pair of headphones connected to the onboard audio and listen closely. The little voice may tell you what's wrong.

dont have the little voice on that board, i dont know what happened when it flatlined but its a 1500 running on an MSI KT400 board ( i think thats the board) with 512 ram, 40 gig WD

Ator · 24-August-05, 04:17 AM

That BSOD error is most likely from a hardware problem. I get it all the time when my RAM is clocked too high. It could be bad RAM.

TimberWolf · 24-August-05, 08:31 AM

Quote:

Originally Posted by Ator


	That BSOD error is most likely from a hardware problem. I get it all the time when my RAM is clocked too high. It could be bad RAM.

I agree. Good possibility that it's the RAM.

And this is from Microsoft's website:
http://www.microsoft.com/resources/d...d_stp_ccgm.asp
Stop 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA

The Stop 0x50 message indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.

subdismal · 24-August-05, 08:54 AM

Yeah, I googled it and got the same information TimberWolf did.

Seems like you need to check your BIOS for memory settings, and since it's probably a Gateway/Dell/HP/whatever, look up the specs for what type of memory it takes, as in the pin, etc. and try to replace the memory if you can't fix it on the software end.

phin3s · 24-August-05, 10:58 AM

Quote:

Originally Posted by subdismal


	Yeah, I googled it and got the same information TimberWolf did. Seems like you need to check your BIOS for memory settings, and since it's probably a Gateway/Dell/HP/whatever, look up the specs for what type of memory it takes, as in the pin, etc. and try to replace the memory if you can't fix it on the software end.

hey buddy, no prebuilts here lol it just happened to be a small software error, quick fix and its up and running

vf1000ride · 25-August-05, 07:06 PM

Hey, glad you fixed it. I'm slow getting to these posts sometimes. Here is a cool webpage I use to find out what some of those DSOD codes are for. Hope it helps for future problems.
http://aumha.org/win5/kbestop.htm

23-August-05, 11:30 PM		#1 (permalink)
phin3s Re-Fu3ling Beyotch	Help with computer problem.... so im trying to fix my sisters computer and when you load windows normally.... when its at the bootscreen it finishes and just reboots..... i load it in safe mode and get the BSOD (blue screen of death) BSOD info PAGE_FAULT_IN_NONPAGED_AREA Technical Info *** STOP 0x00000050 (0x90CCCC, 0x00000000, 0x9090CCCC, 0x00000000) any help would be nice im gonna try windows repair console but if you would happen to know whats wrong, it would be appreciated

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Computer Problem, Cant Fix.	shady08	Other PC Problem / Help	15	09-July-06 01:00 AM
Having a problem with my mothers computer	phin3s	Anything Goes	6	02-February-06 01:05 AM
Computer Problem	coolerguy1984	Other Hardware	10	11-December-05 03:36 PM
Tv-Out Problem, Computer Restarts	RahXephon	Video Cards	4	14-July-04 07:50 PM
I got a very big problem with my computer! Help!	chiquita	Motherboards / CPUs	17	07-May-03 07:15 PM

23-August-05, 11:48 PM		#2 (permalink)
Seikatsu Apex Master Tech Apprentice	That information is really thin. Could you please list the system specs? And what was happenening when it flatlined? Prelim: try booting up with a pair of headphones connected to the onboard audio and listen closely. The little voice may tell you what's wrong.

24-August-05, 04:17 AM		#4 (permalink)
Ator At-Whore	That BSOD error is most likely from a hardware problem. I get it all the time when my RAM is clocked too high. It could be bad RAM.

24-August-05, 08:54 AM		#6 (permalink)
subdismal Apex Tech Demi-God	Yeah, I googled it and got the same information TimberWolf did. Seems like you need to check your BIOS for memory settings, and since it's probably a Gateway/Dell/HP/whatever, look up the specs for what type of memory it takes, as in the pin, etc. and try to replace the memory if you can't fix it on the software end.

25-August-05, 07:06 PM		#8 (permalink)
vf1000ride Apex Elite Expert Tech	Hey, glad you fixed it. I'm slow getting to these posts sometimes. Here is a cool webpage I use to find out what some of those DSOD codes are for. Hope it helps for future problems. http://aumha.org/win5/kbestop.htm