555 flasher layout help

stereomod · 30-November-04, 05:46 PM

i just bought a 555 timer today and a pack of 150 assrted resistors, and wondering if anyone has , or knows of a site that has a diagram of a setup for a LED flasher, but heres the kicker, If Possible could it be on a Breadboard? wondering why? it would just be easier for me, i have spent hours on google trying to find something, but have come up empty

SM

ÃœBER<>POOP · 30-November-04, 07:18 PM

I can look through my notes and try to isolate the timer circuit from a servo controller. Just hope that I can find that chapter of notes...

[edit:] What I was able to find probably isn't useful. The IC's are labeled on this worksheet as 556. Sorry I couldn't help. I'm only a freshman student.

stereomod · 30-November-04, 09:42 PM

Quote:

Originally Posted by ÃƒÅ“BER<>POOP


	I can look through my notes and try to isolate the timer circuit from a servo controller. Just hope that I can find that chapter of notes... [edit:] What I was able to find probably isn't useful. The IC's are labeled on this worksheet as 556. Sorry I couldn't help. I'm only a freshman student.

no worries, i got the circuit complete, and it works like a jewel

HawkEye_Pierce · 30-November-04, 09:57 PM

Just for future reference, the 556 is just a dual 555 timer, in other words, two 555's in one IC.

Good luck.

Nerdz · 01-December-04, 03:02 PM

dam..u built it already..and i just found a tut too..

http://www.geocities.com/SiliconValley/2072/proj2.htm

LOL i used google images instead :p

Lunamods · 01-December-04, 03:09 PM

Quote:

Originally Posted by HawkEye_Pierce


	Just for future reference, the 556 is just a dual 555 timer, in other words, two 555's in one IC. Good luck.

Hawk is correct a 556 is 2 seperate 555's in one package and can be used as a single. You could use them both toghether to create different timing patterns if you wish.

ÃœBER<>POOP · 01-December-04, 03:56 PM

I'll keep that in mind. ECE 101- Circuits is only a term away.... whoo!

30-November-04, 05:46 PM		#1 (permalink)
stereomod Locked Account	555 flasher layout help i just bought a 555 timer today and a pack of 150 assrted resistors, and wondering if anyone has , or knows of a site that has a diagram of a setup for a LED flasher, but heres the kicker, If Possible could it be on a Breadboard? wondering why? it would just be easier for me, i have spent hours on google trying to find something, but have come up empty SM

30-November-04, 07:18 PM		#2 (permalink)
ÃœBER<>POOP Apex Tech Fanatic	I can look through my notes and try to isolate the timer circuit from a servo controller. Just hope that I can find that chapter of notes... [edit:] What I was able to find probably isn't useful. The IC's are labeled on this worksheet as 556. Sorry I couldn't help. I'm only a freshman student. Last edited by ÃœBER<>POOP; 30-November-04 at 07:36 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which post layout do you use?	GlitterKill	Site Suggestions / Feedback	16	12-October-06 01:02 PM
The Register // Auctioneer uses rear flasher to flog old bike	Gizmo	The Register RSS	0	31-July-06 09:58 PM
The Register // Auctioneer uses rear flasher to flog old bike	Gizmo	The Register RSS	0	29-July-06 07:38 AM
My new layout	z0mbi3	Anything Goes	5	20-October-05 07:01 AM
Check out my new layout	Aeturnus	Graphics / Media	22	15-June-04 06:10 PM

30-November-04, 09:57 PM		#4 (permalink)
HawkEye_Pierce Ham Op-Hoe-rator	Just for future reference, the 556 is just a dual 555 timer, in other words, two 555's in one IC. Good luck.

01-December-04, 03:02 PM		#5 (permalink)
Nerdz Sir Knight of Spamalot	dam..u built it already..and i just found a tut too.. http://www.geocities.com/SiliconValley/2072/proj2.htm LOL i used google images instead :p

01-December-04, 03:56 PM		#7 (permalink)
ÃœBER<>POOP Apex Tech Fanatic	I'll keep that in mind. ECE 101- Circuits is only a term away.... whoo!