x2 4400+ OC Results

strangerm · 07-December-05, 10:34 PM

[img]file:///C:/DOCUME%7E1/STRANG%7E1/LOCALS%7E1/Temp/moz-screenshot.jpg[/img]I Just overclocked my system. to 2574MHZ stable and rock solid on air cooling. tt big typhoon. mult x11 fsb 234. I have a set of 2gb gksill sticks and i can't run them mon their stock speed of 500mhz. everythime i do it 250x10 it only overclocks my cpu not the ram. ram auto. gets divided to 333 or 266 whatever it feels like it. so my question is has anybody been able to fix this problem. I have all the latest bios updates and drivers. All help is greatly appreciated
I think i can squeeze a little bit more out of it. please help

THRASHER2 · 07-December-05, 10:59 PM

Quote:

Originally Posted by strangerm


	]I Just overclocked my system. to 2574MHZ

BAM!!!!

Kick back and enjoy the show....its gona have F@Holding in it.....

Please check out the Sweeet Pimp Links..

The first link is the Best!!!
T2's F@Holding ARMY
http://team.pcapex.com/
http://gallery.pcapex.com/
http://articles.pcapex.com/
http://forums.uberw00t.com/
http://www.stanford.edu/group/pandegroup/folding/

BigAkita · 07-December-05, 11:12 PM

Did you purchase them as a set, or did you purchase a pair?

strangerm · 07-December-05, 11:43 PM

as a pair 2gb pair

$SOLID$ Necro · 08-December-05, 02:42 AM

You most likely have the Memory in "Auto" you need to set it manualy to a 1 to1 ratio.

It will often be listed as something like 6/6, or 200FSB, or similar (When using "Manual or Expert instead of Auto)

What Motherbaord are you using?

Oh, and my X-2 OC'd nicely too..until I loaded BOTH CPU's with 2 instances of Folding@Home!

strangerm · 08-December-05, 03:57 AM

No it's not set auto. It's at 400mhz (200) 1:1.
Asus A8N SLI Premium.
timings are stuck at 3448 too.

$SOLID$ Necro · 08-December-05, 05:26 AM

Ok then, have you tried any of this?

Set LDT to 4x
NB Chipset voltage to 1.6 or 1.7v
CPU voltage to 1.45~1.5v (Keep temps under 50c)

You could aslo try 2T timings, (CPC off) but that kills performance.

Get CPUZ and CBID, they are very handy utilities.

I am not sure how good that board is, ABIT has had some pretty poor results on the FSB lately with certain models...get a DFI next time

http://forums.pcapex.com/showthread.php?t=59608

strangerm · 08-December-05, 11:51 AM

Yeah I will go DFI. It was too late once I ordered this one. I got it mostly for SLI. and never got the 2nd card. Crappy. will try your variation though thnx

strangerm · 08-December-05, 11:58 AM

I got it 270MHZ. I figured what was wrong. changing voltage seemed to help. I lowered it down to 2.6 it was 2.8-2.9.thnx

07-December-05, 10:34 PM		#1 (permalink)
strangerm Apex Techie Wannabe	x2 4400+ OC Results [img]file:///C:/DOCUME%7E1/STRANG%7E1/LOCALS%7E1/Temp/moz-screenshot.jpg[/img]I Just overclocked my system. to 2574MHZ stable and rock solid on air cooling. tt big typhoon. mult x11 fsb 234. I have a set of 2gb gksill sticks and i can't run them mon their stock speed of 500mhz. everythime i do it 250x10 it only overclocks my cpu not the ram. ram auto. gets divided to 333 or 266 whatever it feels like it. so my question is has anybody been able to fix this problem. I have all the latest bios updates and drivers. All help is greatly appreciated I think i can squeeze a little bit more out of it. please help Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The 4400	Wafflesomd	Anything Goes	1	06-June-06 07:21 PM
opteron 175 vs x2 4400?	chef7734	Hardware Advice Corner	2	17-January-06 07:24 PM
Fs: X2 4400	Cpt.Planet	Trading Post	6	08-January-06 12:01 AM
AMD X2 4400 OC Results	Cpt.Planet	AMD CPU/Motherboard OC	6	29-August-05 06:01 PM
4400 on USA.	Digital-World	Anything Goes	3	06-June-05 08:57 PM

07-December-05, 11:12 PM		#3 (permalink)
BigAkita n00b-ass reviewer	Did you purchase them as a set, or did you purchase a pair?

07-December-05, 11:43 PM		#4 (permalink)
strangerm Apex Techie Wannabe	as a pair 2gb pair

08-December-05, 02:42 AM		#5 (permalink)
$SOLID$ Necro Mastah Overclocker	You most likely have the Memory in "Auto" you need to set it manualy to a 1 to1 ratio. It will often be listed as something like 6/6, or 200FSB, or similar (When using "Manual or Expert instead of Auto) What Motherbaord are you using? Oh, and my X-2 OC'd nicely too..until I loaded BOTH CPU's with 2 instances of Folding@Home!

08-December-05, 03:57 AM		#6 (permalink)
strangerm Apex Techie Wannabe	No it's not set auto. It's at 400mhz (200) 1:1. Asus A8N SLI Premium. timings are stuck at 3448 too.

08-December-05, 05:26 AM		#7 (permalink)
$SOLID$ Necro Mastah Overclocker	Ok then, have you tried any of this? Set LDT to 4x NB Chipset voltage to 1.6 or 1.7v CPU voltage to 1.45~1.5v (Keep temps under 50c) You could aslo try 2T timings, (CPC off) but that kills performance. Get CPUZ and CBID, they are very handy utilities. I am not sure how good that board is, ABIT has had some pretty poor results on the FSB lately with certain models...get a DFI next time http://forums.pcapex.com/showthread.php?t=59608

08-December-05, 11:51 AM		#8 (permalink)
strangerm Apex Techie Wannabe	Yeah I will go DFI. It was too late once I ordered this one. I got it mostly for SLI. and never got the 2nd card. Crappy. will try your variation though thnx

08-December-05, 11:58 AM		#9 (permalink)
strangerm Apex Techie Wannabe	I got it 270MHZ. I figured what was wrong. changing voltage seemed to help. I lowered it down to 2.6 it was 2.8-2.9.thnx