3200+ 939 and a ecs rs480-m

lord_tris · 07-November-05, 07:14 PM

So has anyone messed with this ATI chipset and over clocking yet?
I have the MATX version of the board, 3200+winni and 512mb of the PNY Verto ram

$SOLID$ Necro · 10-November-05, 05:45 PM

Not that I know of... you would be the first member to have one, how's it doing so far?

lord_tris · 10-November-05, 10:39 PM

well i have had it up too 2.25 stable, on air and stock voltage so far

$SOLID$ Necro · 11-November-05, 12:28 AM

How about posting some test results, like Sandra CPU/Memory and Super Pi ?(1MB test)

CPUZ screenshots are nice too!

I'm sure there's a bit more in that CPU, I believe I had my 3000+ to around 2.4~2.5GHZ on the stock cooler.

Have you thought of upgrading to a new Zally 9550 or the Thermatake Typhoon? That CPU might be able to reach upwards of 2.6 or more for daily use

Ace123 · 11-November-05, 12:54 AM

Id like to see someone get ahold of that new DFI lanparty board with the ATI chipset. Its done some amazing things over at Anand

lord_tris · 11-November-05, 02:53 PM

first of all for some reason i could ne get back up to 2.215 dont know why.

so here is the system as it stands now

Case- Coolermaster 541
MOBO- ECS rs480-m from ati
PROC- A64 3200 winchester @ 2.180 @ 1.39v
HEATSINK- Zalmen 7000
MEM- PNY Verto 3500 ram @ 2.5v @ 2.5,3,3,8
VIDEO- MSI X600Xt @ 540core/403.41mem
HHD- Western Digital 36.7gig raptor
Wireless- Linksys G

and here are all the benchmarks a could think to run on the beast

$SOLID$ Necro · 11-November-05, 03:29 PM

Well, your CPU voltage might be a bit low for Overclocking, needs to be in the 1.45-1.5v range.

Try 2.8v for the memory, and 1.7v for the chipset.

"LDT" is a ratio that must be lowered from the original 5x, it will become unstable when overclocking with that setting...try 4x until your reach 250FSB, beyond you will need 3x

LDT
200x5=1000HTT
250x4=1000HTT
300x3=900HTT

lord_tris · 11-November-05, 03:46 PM

forgot to add the cpuz screenie

07-November-05, 07:14 PM		#1 (permalink)
lord_tris Apex Techie I	3200+ 939 and a ecs rs480-m So has anyone messed with this ATI chipset and over clocking yet? I have the MATX version of the board, 3200+winni and 512mb of the PNY Verto ram

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Affiliate Review: ECS RS480-M Crossfire Xpress 200 K8 Motherboard Review @ PCstats	Twizted	PC Apex Web News	0	28-June-06 04:44 PM
3200 ram	michaelwolf59	Deals and Steals	0	24-March-05 08:30 AM
Amd 64 3200+	LoNeWolF05	AMD CPU/Motherboard OC	18	15-January-05 11:35 PM
amd 64 3200+??	biohazardpc	Anything Goes	5	21-February-04 12:03 AM
Nf7-s and RAM over 3200	Big Deuce	Motherboards / CPUs	6	11-January-04 03:03 PM

10-November-05, 05:45 PM		#2 (permalink)
$SOLID$ Necro Mastah Overclocker	Not that I know of... you would be the first member to have one, how's it doing so far?

10-November-05, 10:39 PM		#3 (permalink)
lord_tris Apex Techie I	well i have had it up too 2.25 stable, on air and stock voltage so far

11-November-05, 12:28 AM		#4 (permalink)
$SOLID$ Necro Mastah Overclocker	How about posting some test results, like Sandra CPU/Memory and Super Pi ?(1MB test) CPUZ screenshots are nice too! I'm sure there's a bit more in that CPU, I believe I had my 3000+ to around 2.4~2.5GHZ on the stock cooler. Have you thought of upgrading to a new Zally 9550 or the Thermatake Typhoon? That CPU might be able to reach upwards of 2.6 or more for daily use

11-November-05, 12:54 AM		#5 (permalink)
Ace123 Apex Tech Fanatic Supreme	Id like to see someone get ahold of that new DFI lanparty board with the ATI chipset. Its done some amazing things over at Anand

11-November-05, 02:53 PM		#6 (permalink)
lord_tris Apex Techie I	first of all for some reason i could ne get back up to 2.215 dont know why. so here is the system as it stands now Case- Coolermaster 541 MOBO- ECS rs480-m from ati PROC- A64 3200 winchester @ 2.180 @ 1.39v HEATSINK- Zalmen 7000 MEM- PNY Verto 3500 ram @ 2.5v @ 2.5,3,3,8 VIDEO- MSI X600Xt @ 540core/403.41mem HHD- Western Digital 36.7gig raptor Wireless- Linksys G and here are all the benchmarks a could think to run on the beast

11-November-05, 03:29 PM		#7 (permalink)
$SOLID$ Necro Mastah Overclocker	Well, your CPU voltage might be a bit low for Overclocking, needs to be in the 1.45-1.5v range. Try 2.8v for the memory, and 1.7v for the chipset. "LDT" is a ratio that must be lowered from the original 5x, it will become unstable when overclocking with that setting...try 4x until your reach 250FSB, beyond you will need 3x LDT 200x5=1000HTT 250x4=1000HTT 300x3=900HTT

11-November-05, 03:46 PM		#8 (permalink)
lord_tris Apex Techie I	forgot to add the cpuz screenie