...OK pimps,
AMD prices are dropping to damm near cheap as dinner for two. I figured it was time to let out all the stops. Post em' here. Your highest
clock, from what CPU, Mobo, FSB,multiplier ,voltage,cooling etc. etc.

2500 barton,fsb180 x 13.5 @ 2460mhz
EPoX 8K9A2+/1.90V core/2.80Vdimm
CXM256aX2700c2
h2o/dd1/250gph@79.5degF.

I'll give you all an easy target to beat...

2075MHz
2100+ "B"
A7N8X Non-deluxe (Bollocks, now the Deluxe is only 10 bones more at newegg...)
166*12.5, 1.60Volts
Home made cardboard duct, SK7 (I love these things)

I fiddled with the voltage a lil bit, but I'm newish to this, didn't have much success, the 1.60V is stock... Something ran out of headroom...

I know lcpiper pulled at least 400Mhz out of his 2100. I have taken a 1.4 Athlon T-Bird up to 1.7, but only got 200Mhz out of my 2200 T-bred.

I just got my Abit MOBO lastnight. Swapped out the Leadtek K7NCR18d-pro. So here is my 1st OC with the new MOBO.

2800 barton - fsb 200 x 12 @ 2400mhz
Abit NF7-S - 1.75V core - 2.70 Vdimm

WC @ 37.5 deg C

I will see just how far I can push the 2800 on Sat.

Right BA, I hit a very easy 175 X 13 @ 1.725Vcore for a 500+ mhz OC on my XP2100+ T-Bred B on an ABit AT7-e with an SLK-800 and Smartfan2.

Running on water right now.

Hmmmm, a tinkering I will go.... Gonna have to find some better case fans to feed my duct and then play with the voltages some more. I have the 2 back case fans blowing together thru a duct directed directly into the SK-7, no dead spot, great airflow, and it's nice and quiet...

And I'm guessing yer gonna tell me thet Crucial 2700 isn't known to be a good overclocking setup, but it'll have to do till I become substantially richer LOL

Anyhow, let's see some more O/C results...

I can run @ 166*11 quite easily but my temps are so high that my motherboard shuts it down after being on for 30-45 minutes. I have serious heat problems that need to be solved before I overclock substantially. 166*10.5 (1.75ghz) is what I am at right now. That's an overclock of 230mhz, which isn't half bad. I am running at a vcore of 1.575 at the moment. Highest I ever posted and run stabilly was 175*11 (1.93ghz), with a vcore of 1.6volts, but as before my mobo shut me down again, but this time in less than 15-20 minutes. I will get a full sized tower at some point in time, aswell as one of them brandnew SLK-900U's because I found one for a very good price right here in town. FINALLY!!!

EDIT: Apparently I may have a problem called "Metal Migration" according to Fu3l. He insists that it can't remove heat enough from the die to the heatsink and therefore thats creating little bubbles of silicon, and pretty much in short; my processor is on a short road to death. Anyone have anything to add to this theory?

Not much for me

AlthonXP 2000+ (pal. core) @ 1.83ghz
ASUS A7N8X Nforce2 board
cpu @ 1.8v
Volcano9
temps: (BIOS and MBM report 30C, my digidoc probe reports 41C)

I'm still amazed at lcpiper's 500Mhz on air.

Yeah I have to agree with BA. That amazed me too.

Me too..It makes me cry.

Dayam man, 500+ thats....whoa.....

barton 2500+ @ 1.973ghz
175 fsb
gigabyte ga-vaxp
VOLCANO 7.......
1x512 cas2 Mushkin pc2700
it runs at 130F....which is terrible, due to V7(not the plus)
and i know its not much of an OC, i havnt tryed to push it any further, and i havnt messed with the Voltage any,
but i am soon to order an sk7, when that gets here, i will post my max
happy clocking

Gotta luv that 2100+ for it's overclocking potential. No wonder it's a favorite among tweakers.

Just played with my 2600+/333. 2505.6, up from 2079.6 for a total of 426 Mhz overclock. I hit a hard wall after that. I do like this Abit NF7-S rev. 2. Processor topped out well before it did. Not too shabby. That's 15@166 or 14@179. My rams holding me back on the big fsb overclock.

everyone tell me what u coolin it with please, and thx.

Innovatek block, black ice extreme and Danner Mag 250.

i cool with a thermaltake Volcano 7 (not the 7+) right now, my 2500+ runs at like 123 idle (not oc).
when i get my sk7 (woot) ima do some nice OCing
im going to take the variable fan off my V7 and put it ontop of the sk7, then im going to buy a smart fan II and replace the variable fan,

If you go over to Overclockers.com website and check their CPU data base, you will see much higher OCs on the XP2100+, but most are on NF2 boards and are not limited on the PCI / AGP bus as I am.

I was on an SLK-800 with a Smartfan2 originally when I set that OC, but I am at home running a Rev3, Maxxpert rad, Ehiem1048, Tank-O-Matic Res, and sometimes my chiller made from an 80w TEC, Maze3, Alpha PLA8045 powered by a stand alone 300W AT PSU.

I had one of those nice AXIA batch 1.0GHZ T-Birds back in thday and ran it solid at 1.4GHZ using just a Thermoengine and a 7k rpm fan. =]

I also ran a 2400+ cpu at 2434 Mhz on a KX7-333R at 185 FSB with a voltage mod and water cooling.

As for intel, The 1.8A Northwoods are insane! I ran my 1.8Ghz at 2.7Ghz with water cooling! Unfortunately I succumbed to SNWDS because I ran the voltaeg on it too high... So now I have a 1.8Ghz Northwood with no cache on it because I burned it up. Oops...

Danm GlitterKill, I think I remember someone warning you about that too . Oh well, guess you can't make an omelette without breaking a few eggs... BTW I was amazed when you posted that OC