NF7+AMD 2000 users (or anyone that can help)

lpapirny · 09-June-04, 11:20 PM

ok i know that u can easily get AMD 2000 up to 2 ghz easy from wut i hear at least

but i havnt been able to do this all ive been able to get it up to is 1.8 so how can i get it higher I KNOW THERES LOTS of u 2000 users like me that have been able to do this but i cant

could ya help me out??/

ZENNZZO · 09-June-04, 11:30 PM

What all do you have in your system, RAM, PSU, the kind of cooling etc?
What have you done so far in the way of O/Cing?

jcarkeys · 09-June-04, 11:30 PM

Up voltage, use better cooling, drop the mult, get better RAM, loosen RAM timings.

lpapirny · 09-June-04, 11:34 PM

Quote:

Originally Posted by ZENNZZO


	What all do you have in your system, RAM, PSU, the kind of cooling etc? What have you done so far in the way of O/Cing?

ive got AMD 2000 abit nf7-s mobo kingsten hyperex dual channel 512 mb, stock heat sink that came with the cpu and my psu is a 450 enermax
and ive just changed the wutcha call it up to 148 and i thas all

lpapirny · 09-June-04, 11:36 PM

Quote:

Originally Posted by jcarkeys


	Up voltage, use better cooling, drop the mult, get better RAM, loosen RAM timings.

hmm well i cant change my multiplier factor it doesnt start wen i do ive changed my vcore to 1.75 and it didnt do anythin from 1.6 and i cant change the thngy anymore (i gotta know that name grrr)

lets here the suggestions

jcarkeys · 09-June-04, 11:37 PM

Quote:

Originally Posted by lpapirny


	ive got AMD 2000 abit nf7-s mobo kingsten hyperex dual channel 512 mb, stock heat sink that came with the cpu and my psu is a 450 enermax and ive just changed the wutcha call it up to 148 and i thas all

Get a new heatsink, then try and mess with the big dogs. And is it a palomino or a thoroughbred, cause if it's a pally, it's prolly topped out anyways.

EDIT: SInce it's a locked multiplier, I'm betting it's a palomino. Is the proc a brownish color?

TheOutcast · 09-June-04, 11:40 PM

STOCK COOLING!?!??! ARE YOU MAD!??!?!?!

Sounds like what I have too.. locked palo that's close enough at stock to its upper limit..

ZENNZZO · 09-June-04, 11:42 PM

Quote:

Originally Posted by lpapirny


	hmm well i cant change my multiplier factor it doesnt start wen i do ive changed my vcore to 1.75 and it didnt do anythin from 1.6 and i cant change the thngy anymore (i gotta know that name grrr) lets here the suggestions

I know alot of slang, use it myself I do...
But,
you got to write down the stuff in BIOS if you want some help...
whatchamacallits, thingys, and youknows aren't allowed in the O/C world.
They are too vague and could mean anything.
When you have the nomenclature down, I'll be more than pleased to help ya out...

lpapirny · 09-June-04, 11:46 PM

Quote:

Originally Posted by jcarkeys


	Get a new heatsink, then try and mess with the big dogs. And is it a palomino or a thoroughbred, cause if it's a pally, it's prolly topped out anyways. EDIT: SInce it's a locked multiplier, I'm betting it's a palomino. Is the proc a brownish color?

yeh its a brownish colour but in cpuz it says thouroghbread
????

ZENNZZO · 09-June-04, 11:51 PM

Quote:

Originally Posted by lpapirny


	yeh its a brownish colour but in cpuz it says thouroghbread ????

"thouroughbread".heh heh heh...you sure d00d? got a screenie of that?

jcarkeys · 09-June-04, 11:53 PM

when you replace that heatsink, check to see whethere the numbers are on the blackish part (called the core) or on a sticker on the brownish part.

lpapirny · 09-June-04, 11:59 PM

Quote:

Originally Posted by jcarkeys


	when you replace that heatsink, check to see whethere the numbers are on the blackish part (called the core) or on a sticker on the brownish part.

ok here are the numbers ive found on the proc
axda2000dut3c
2390234a40022
kixip 04035pmw
thas all ive found

ZENNZZO · 10-June-04, 12:03 AM

Quote:

Originally Posted by lpapirny


	ok here are the numbers ive found on the proc axda2000dut3c 2390234a40022 kixip 04035pmw thas all ive found

Alright, set the multiplier to 10 and boot to windows

lpapirny · 10-June-04, 12:08 AM

Quote:

Originally Posted by ZENNZZO


	Alright, set the multiplier to 10 and boot to windows

hahahah ur funny that didnt work at all anythin i need to change for it too??

Kage · 10-June-04, 12:21 AM

Ok d%d, up the FSB to 166, up the Vcore to 1.65, and pray you have some PC2700 in your system that actually works. This'll get you 2075MHZ, which is what I'm running at.

lpapirny · 10-June-04, 12:37 AM

Quote:

Originally Posted by Kage


	Ok d%d, up the FSB to 166, up the Vcore to 1.65, and pray you have some PC2700 in your system that actually works. This'll get you 2075MHZ, which is what I'm running at.

u have cpu interface enabled riight and that didnt do anything for me it kept it at 1.8 give me alll ur specs and yeh i have over 2700 ram (as in specs like ALL ur cmos setings so i can mimick them
THNX

ZENNZZO · 10-June-04, 01:45 AM

Quote:

Originally Posted by lpapirny


	hahahah ur funny that didnt work at all anythin i need to change for it too??

What's funny,
...is you need to learn when somebody is trying to help you, have at it superstar.
I don't think you are ready to O/C.

godfoot · 10-June-04, 12:40 PM

Big whoopsie there Ipapirny, Zennzzo wouldn't stear you wrong on OCing.
I do not have THAT much experience and have gotten just over 2.3GHz on my T'bred B core 2000 on a Shuttle AN35/N Ultra mobo....... and this is with sub-par case cooling and PC2700 RAM.
I have learned enough from Zennzzo that even using a different mobo than he is (and reading on other Shuttle forums) that my 2000 can still be pushed farther, probably past 2.5.
Now if I can just win that Corsair RAM giveaway and that TDX..........*dream mode on*

jcarkeys · 10-June-04, 12:41 PM

Don't bother OCing with that heatsink of yours, period. you'll just end up with frustration.

MaTtsPc · 11-June-04, 12:40 AM

git some beter cooling! beter hsf id go with the slk900a good for the money an id through a tornado fan on it! then id try setting the Multiplier to 10 an the Vcore to 1.7 an boot it up an see what you git then! But lissen to zenn i think he knows what he is talking about!!!

off topic!! but how that overclock comming anyways zenn? have you hit 3Ghz yet?

09-June-04, 11:20 PM		#1 (permalink)
lpapirny Apex Master Tech Apprentice	NF7+AMD 2000 users (or anyone that can help) ok i know that u can easily get AMD 2000 up to 2 ghz easy from wut i hear at least but i havnt been able to do this all ive been able to get it up to is 1.8 so how can i get it higher I KNOW THERES LOTS of u 2000 users like me that have been able to do this but i cant could ya help me out??/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2000 vs. XP	Wafflesomd	Anything Goes	6	14-December-06 07:48 PM
FS AMD Athlon 2000+	TREE	Trading Post	0	09-October-05 05:06 AM
2000 and still going...	KayinStorm	Anything Goes	14	02-December-03 01:55 PM
My XP 2000+ tbred O/C	hawklen	AMD CPU/Motherboard OC	6	09-June-03 02:35 PM

09-June-04, 11:30 PM		#2 (permalink)
ZENNZZO Direct Cool Hoe	What all do you have in your system, RAM, PSU, the kind of cooling etc? What have you done so far in the way of O/Cing?

09-June-04, 11:30 PM		#3 (permalink)
jcarkeys Key Hoe	Up voltage, use better cooling, drop the mult, get better RAM, loosen RAM timings.

09-June-04, 11:40 PM		#7 (permalink)
TheOutcast Minnes-hoe-tan	STOCK COOLING!?!??! ARE YOU MAD!??!?!?! Sounds like what I have too.. locked palo that's close enough at stock to its upper limit..

09-June-04, 11:53 PM		#11 (permalink)
jcarkeys Key Hoe	when you replace that heatsink, check to see whethere the numbers are on the blackish part (called the core) or on a sticker on the brownish part.

10-June-04, 12:21 AM		#15 (permalink)
Kage Lokie's Personal WU-Hoe	Ok d%d, up the FSB to 166, up the Vcore to 1.65, and pray you have some PC2700 in your system that actually works. This'll get you 2075MHZ, which is what I'm running at.

10-June-04, 12:40 PM		#18 (permalink)
godfoot A George Orwell fan...sorta	Big whoopsie there Ipapirny, Zennzzo wouldn't stear you wrong on OCing. I do not have THAT much experience and have gotten just over 2.3GHz on my T'bred B core 2000 on a Shuttle AN35/N Ultra mobo....... and this is with sub-par case cooling and PC2700 RAM. I have learned enough from Zennzzo that even using a different mobo than he is (and reading on other Shuttle forums) that my 2000 can still be pushed farther, probably past 2.5. Now if I can just win that Corsair RAM giveaway and that TDX..........dream mode on

10-June-04, 12:41 PM		#19 (permalink)
jcarkeys Key Hoe	Don't bother OCing with that heatsink of yours, period. you'll just end up with frustration.

11-June-04, 12:40 AM		#20 (permalink)
MaTtsPc Apex Tech God	git some beter cooling! beter hsf id go with the slk900a good for the money an id through a tornado fan on it! then id try setting the Multiplier to 10 an the Vcore to 1.7 an boot it up an see what you git then! But lissen to zenn i think he knows what he is talking about!!! off topic!! but how that overclock comming anyways zenn? have you hit 3Ghz yet?