First off AMD only, I am not interested in P4'$. Who is daddy around here? What is your oc? What is your system?

boo include p4

If psychofunk were to include Pentiums, then this thread would not belong in the AMD OC forum any longer.

If I included P4'$, I'd have to use those guns on myself...

$Solid$Necro, with 26something, then I have next, with a 251, and then I forget...

i knwo this isnt the highest oc here, but it will be till someone else posts..

EDIT: damn you kayin you posed like 1 second ahead of me

Attached Thumbnails

 

Beeeeeeeiiiiiiiitch I'm da mack daddy, got my K6-2 @ 124 X 5.5 on a Volcano 6

And to further my claim...

http://forums.pcapex.com/attachment....chmentid=10709

526FSB


Hardware
DFI Lan Party Rev.B
AMD MOBILE XP2500+@ 2.5GHZ+
Geil Platinum DDR500 @ 526FSB+
Antec True Control 550 watt P/S
Zallman HSF

Settings
1.8v CPU
2.9v Memory
1.8v NB Chipset
1.7v AGP
CAS 3-4-4-8

More pics below at my Clan website

http://groups.msn.com/SOLIDRTCW/soli...ck.msnw?Page=1

Attached Thumbnails

   

440fsb check sig for system

Hey Solid and Necro can you help me out with my DFI when it comes back from RMA. I have been going nuts with this board because it is so damn sensitive. I know I have the system to do it but my board was a baby so I had to RMA it. Hell I got into windows at 250 on first try but then it pissed on itself and corrupted the bios. Hopefully I'll get a better board this next time. BTW what Bios are you guys useing?

Nice job with the NF7-S Ex.

Hey Bob Ihadababyitsaboy, what is your rig?

My 306 MHz bus pwnz j00 all .....i wish.. 15x153 damn multi...

Are we including 64's in this one??

Quote: Originally Posted by biohazardpc Are we including 64's in this one??

Did you get yours up and running???

Yes my 64 is up and running.. I just need to get decent ram but I can get my fsb pretty high on what ram i have..440 is a piece of cake and I am sure I can hit close to 500 if I need to but want better ram first..

Quote: Originally Posted by biohazardpc Yes my 64 is up and running.. I just need to get decent ram but I can get my fsb pretty high on what ram i have..440 is a piece of cake and I am sure I can hit close to 500 if I need to but want better ram first..

Still no luck on the memory.....geeze.......

Quote: Originally Posted by psychofunk Hey Solid and Necro can you help me out with my DFI...

Solid and Necro ??

Make up yer mind..wich one of us do you want help from?

I am using a beta bios, the original bios was crap!!! it was corrupting my HD at 250FSB also

I think it was 12-10 or something like that, I have the link at home...
So when Psycho and Funk get there board back, lemme know

err, I meant solid and kayin...that is what happens when you don't get enough

What system did you get Bio?

what can i do to git my fsb up higher! im running a 2500+333fsb @ 3200+400fsb! an my multiplier is locked at 11! can anyone help? is there anyway to unlock it ! also im running the Abit Nf7-S v2.0

matt

Quote: Originally Posted by MaTtsPc what can i do to git my fsb up higher! im running a 2500+333fsb @ 3200+400fsb! an my multiplier is locked at 11! can anyone help? is there anyway to unlock it ! also im running the Abit Nf7-S v2.0 matt

There is a way to unlock it, it involves connecting some bridges and making the CPU think it's a Mobile CPU, wich are multiplier unlocked.

Check out this thread below I started a while back.

http://forums.pcapex.com/showthread....ight=unlocking

You have PC2700 running at PC3200 speeds, you are most likely topped out in the RAM dept.

The only way to push ram up higher is to loosen timings and add voltage, and you probably have allready done that to reach PC3200 speeds.
I would suggest getting some good PC 3200 - PC3500 or better and that should get you farther.
You could try using a memory divider to isolate the CPU, and see if the memory is what is holding you back.
Using a 4/5 divider sould allow the CPU to run faster than the memory, and allow for a higher CPU overclock, but it won't perform as well because the memory will be running slower..it just lets you know the bottleneck (CPU or RAM)

Without volt mods the NF-7 seems to top out around 440-450FSB, so unless your CPU becomes the limiting factor, you have room to go a bit higher.