DFI LAN PARTY@ 260+FSB (W/Benchmarks)

$SOLID$ Necro · 28-March-04, 08:36 AM

I Broke the 520FSB barrier last (260 Bios) after finally fixing my Home Network issues tonight (Thx Red 02) I was able to get back to testing the FSB out on this DFI Lan Party Rev B. I was stuck with cold boot problems and stabilty issues above 500FSB, but after chatting with Kayin and Chrome who were similar experiencing issues with there new infinity board also, I decided to try a new "Beta" Bios from DFI that realy helped, it stopped crashing in the middle of benchmarks

I have not had time to run all the benchmarks yet, But so far mem test passes no problems, and My Sandra scores are now in the 3.8+Mb/s range in early testing at 263FSB in the bios with 256 MB Geill DDR 500

I ran 1 test with PCMARK 02, and it went well using 260FSB x9.5 in the bios with CAS 3-5-5-9 Timings. I have also tried 3-4-4-8, but did not run the benchmark again to see if it improved yet.

This by no means is an optimised score, I am close to breaking the 7K mark for memory scores, but this was a baseline benchmark, I need to try tighter timings

http://service.futuremark.com/compare?pcm=1746525

ZENNZZO · 28-March-04, 08:41 AM

And he crushes the 500fsb barrier!! way to go SOLID!! hat's off...and KUDOS brah.

Chrome_Rust · 28-March-04, 10:07 AM

trust me vro, breaking 7k in memory is a feat on an amd! when i had my 3000 running 236 x 10.5 with the corsair XMS3500 @ 11-2-2-2 i think i did it once.....and the machine was never the same after that....HAHAHA IT WAS FROCKING FAST!!!

$SOLID$ Necro · 28-March-04, 10:19 AM

Thanks Guys! I might have to format again after screwing with the bios so much..Got the BSOD so many times I was talking to myself in a language that was not quite Human

Let me say this is the most PICKY bios I have seen so far

I ran a 3D mark 01 test at 550 core 315 memory (Medium OC settings) and 3-4-4-8 instead of 3-5-5-9 I used for PC mark 02, it seemed to like it..Have to put the fine tune on her tonight, see if I can bump my scores up in the Benchmark challenge

Red02 · 28-March-04, 10:45 AM

GJ Bro

nice to see some progress with that M2500. I can wait till I get mine back from RMA, and then I'll give it a go again.

28-March-04, 08:36 AM		#1 (permalink)
$SOLID$ Necro Mastah Overclocker	DFI LAN PARTY@ 260+FSB (W/Benchmarks) I Broke the 520FSB barrier last (260 Bios) after finally fixing my Home Network issues tonight (Thx Red 02) I was able to get back to testing the FSB out on this DFI Lan Party Rev B. I was stuck with cold boot problems and stabilty issues above 500FSB, but after chatting with Kayin and Chrome who were similar experiencing issues with there new infinity board also, I decided to try a new "Beta" Bios from DFI that realy helped, it stopped crashing in the middle of benchmarks I have not had time to run all the benchmarks yet, But so far mem test passes no problems, and My Sandra scores are now in the 3.8+Mb/s range in early testing at 263FSB in the bios with 256 MB Geill DDR 500 I ran 1 test with PCMARK 02, and it went well using 260FSB x9.5 in the bios with CAS 3-5-5-9 Timings. I have also tried 3-4-4-8, but did not run the benchmark again to see if it improved yet. This by no means is an optimised score, I am close to breaking the 7K mark for memory scores, but this was a baseline benchmark, I need to try tighter timings http://service.futuremark.com/compare?pcm=1746525 Attached Thumbnails Last edited by $SOLID$ Necro; 28-March-04 at 09:39 AM..

28-March-04, 10:07 AM		#3 (permalink)
Chrome_Rust Apex Tech God	trust me vro, breaking 7k in memory is a feat on an amd! when i had my 3000 running 236 x 10.5 with the corsair XMS3500 @ 11-2-2-2 i think i did it once.....and the machine was never the same after that....HAHAHA IT WAS FROCKING FAST!!! Attached Thumbnails

28-March-04, 10:19 AM		#4 (permalink)
$SOLID$ Necro Mastah Overclocker	Thanks Guys! I might have to format again after screwing with the bios so much..Got the BSOD so many times I was talking to myself in a language that was not quite Human Let me say this is the most PICKY bios I have seen so far I ran a 3D mark 01 test at 550 core 315 memory (Medium OC settings) and 3-4-4-8 instead of 3-5-5-9 I used for PC mark 02, it seemed to like it..Have to put the fine tune on her tonight, see if I can bump my scores up in the Benchmark challenge Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CPU Benchmarks	goodman123	Results	13	05-July-06 05:42 PM
Benchmarks, please...	KayinStorm	Anything Goes	3	05-January-04 02:24 PM
DX8 Vs. DX9 Benchmarks!	scapegoat	PC Apex Web News	2	04-January-03 10:43 PM
Woo hoo! Ahoy benchmarks!	Cyphre	Results	0	19-December-02 11:28 PM
3d benchmarks	zerodude01	Video Cards	5	12-December-02 03:20 PM

28-March-04, 08:41 AM		#2 (permalink)
ZENNZZO Direct Cool Hoe	And he crushes the 500fsb barrier!! way to go SOLID!! hat's off...and KUDOS brah.

28-March-04, 10:45 AM		#5 (permalink)
Red02 Freck-hoe-d	GJ Bro nice to see some progress with that M2500. I can wait till I get mine back from RMA, and then I'll give it a go again.