Here is the
mobo and "hardware essentials" all installed, cables routed, and powered up. In the first pic, you can't even really see the 6-pin PCI-e cable that powers the ATI X1900 XT. It sneaks up from beneath the
mobo too, with just enough length to reach the connector without so much as a twist or a crimp. From that angle, you can't even see the connected IDE cable, either.
The second pic shows at the top that I connected the
HSF fan controller, I wanted to test the speed control. It also shows the really cool red glowing lure of the anglerfish. It'll look a lot sweeter when everything is lit up with UV....you'll barely see the anglerfish, just the glowing lure...until the UV comes on.
