Well Folks the time has come to start clearing out a little stuff around here.....
I have a garage full of extra things that I don't need....So this thread may grow more and more over the next few weeks as I get rid of lots of parts, supplies, and misc computer stores I no longer need laying around making momma angry at me for dominating half the garage.
The first two items are the most valuable to see if anyones interested....
Up First....
The Famous Digital-SnoCone maker....
Thats right the original prototype of the Zenzzovap -60 Phase Change Unit...
This unit was built on an aluminum frame set so that it would fit on top of most cases...And even inside some larger server tower cases...
Its 110V AC power....completely.....Requires no extra hook up for the 12v fan.....
The fan is a 110V rotron....and its pretty insane..
Extra care was taken in the tube bending on this one as I can be a rather anal retentive prick when it comes to asthetics....
You have seen units like this before sell for $700.00 or higher on xtremesystems.org....and many smaller less capable brand name units go for well over $1000.00 Most the brand name units like the VAPOCHILL may go down to -20 but thats about it....
This puppy can hit -60 and will give you less then -40 on load for sure....
-40 is the sweet spot that unlocks most chips to insane capabilities....
We had a simple 533mhz p4 stock 2.53 running at 3.4Ghz with this phase unit....
and the 2.4C hit 4.3
Ghz.....
See this thread.....
http://forums.pcapex.com/extreme_coo...ght=digi+phase
Its not the most perfect beautifull unit....as it has seen some use....but it is complete, functional and ready to bolt up to any socket type you have....
The main head and the gasket kits are Chilly 1 kit...so replacement parts can be had....I will be more then willing to help you locate anything you need to get this working....
I am selling this for $450.00 plus ground shipping as this thing can not be flown due to the gasses in it...
If you are serious pm me and we can work something out to get this shipped affordably for you..
See Pics Below.....
Next is a Fortron FX700-GLN ATX12V/ EPS12V 700W All-In-One Power Supply
This is an SLI capable ATX 2.0 capable
PSU....
I bought it for my Pressler/Crossfire Rig....and ended up using an OCZ instead...
It has some minor scratches on it from installing it into the LIAN-LI case......but the
PSU has less then 5 hours on it......The crossfire cards when released would only work on single rail
PSU's....this thing is ATX 2.0 capable....so it has 4 rails....
Its a great
PSU and ran the system fine...but overclocking on a PRESSLER/CROSSFIRE setup might not be for you....
However if your using any AMD/NVIDIA setup...this thing screams....
System specs below are
Brand FSP Group (Fortron Source)
Model FX700-GLN
SPEC
Type ATX12V/ EPS12V
Maximum Power 700W
Fans 12Cm Ball Bearing Fan
PFC Active
Main Connector 20+4-Pin
Dual +12V 4 x +12V
SLI Support Support Dual GeForce 7900 GTX or Dual GeForce 7800GTX 512
MB
Modular Cabling Support No
Power Good Signal 100-500ms
Efficiency >85%
Over Voltage Protection YES
Input Voltage 115/230 V
Input Frequency Range 47 - 63Hz
Output +3.3@36A,+5V@30A,+12V1@15A,+12V2@15A,+12V3@15A,+12 V4@15A,-12V@0.5A,+5VSB@2A
MTBF >100,000 Hours
Approvals CSA,IEC,UL,CE,TUV
Features
Features NVIDIA SLI Certified
Supports the latest Intel ATX 2.0 standard. Improve the System
Compatibility
*Supports ATI Crossfire & nVidia SLI
VGA Card Double +12V Design.
*Supports the latest AMD 64
CPU
*Conforms to WEEE & RoHS Environmental Directives in Europe
*Extremely low noise design, providing consumers with a quiet, good
operating environment
*Ultra high power of 700W, providing the super player enough power to
ensure a stable system
protection can protect each part of the computer.
*High quality blue cover coating
*12 cm light blue fan, enhancing heat dissipation and reaching the
minimum noise requirement
*Neat and tight mesh sleeving improves the ventilation.
*Smart Housing easy plugable D-type connector design.
*Honeycombed cooling vents on the case reduce noise and improve the
heat dissipation and air flow.
Warranty
Manufacturer Warranty 2year direct manufacturer warranty
I can get you the reciept for it should anything ever go wrong with it for RMA pourposes....so that makes the warranty transferable...
This model goes for $170.00 on newegg....
I am selling this one for $140.00 plus shipping....Its practically brand new excpet for a few minor scratches...
I have the box and the manual as well....
See Pics below....
For all items...you can check my trader rating here....and on ebay under bsnider72
Any questions you can pm me.....add me to MSN as bsnider(at)woh.rr.com
or email me at my staff addy digitalworld(at)pcapex.com or bsnider(at)woh.rr.com
I can also answer questions by phone if you pm me the contact info to call you....