Apex Community Forums - View Single Post

jedihobbit · 25-February-08, 12:24 AM

Now that Celtic Spirit is again being placed on indefinite hold, wanting to bring DreamCatcher into the realm of AM2, and a serious look at water-cooling, it looks like it is time to move on to v2.0. My initial W/C questions and issues will be presented in another thread (got to get that going!) as well as one following my testing & oc'ing the mobo assembly on air. As everything starts converging for "completion" those two threads will be merged with this one.

Here are the component changes that helped me to decide to call it v2.0:

Case: Convert MicroFly to MX6 ?Hybrid?
Mobo: Abit NF-M2 nView
CPU: AMD 4000+ Brisbane
HSF: Stock Opty 175 / Tt SmartFan2
Memory: Corsair CM2X1024 ? 6400C4

These components were in the pipeline long before the idea of water-cooling came along therefore running the system on air influenced the original update.

Case Conversion: While I love it, Ultra?s MicroFly case has a couple of "flaws". One of which was airflow. Even though it uses a 120mm exhaust fan, intake is a little limited. The front of the chassis has a lot of holes and a 80mm fan, but the front bezel is somewhat restrictive for air intake. The MX6 was the next version of the chassis design and fixed that problem. The bezel uses a mesh surface that is very "breathable" and solved any restrictive airflow issues.

I had won a MX6 was about to sell it when I realized I could swap the exterior pieces to give DC better cooling it just took a while to get around to doing that. Also as e-bay would have it I ended up with an nView, so last Sunday I started......

Here sit the two boxes waiting to be "hybridized" and then with everything removed but the bezels.

It was interesting to note that when I started taking the boxes apart Ultra opted to drop the four mounting screws used in the MicroFly and rely solely on the four retention clips with the MX6. Admittedly it makes life easier as one does not have to remove the HDD tray and the requirement for a short screwdriver if a PSU is in place. Here we have two views with the front bezel removed and finally a side view with everything together.

The left over chassis and exterior parts are headed for Yoda?s SMN, an attempt at a home server build (or excuse to build another computer!).

As one that does a lot of his stuff based on the "bling" factor, I'm going to miss the top window (may do one at a later date) but was compensated by the fact the new case matches my new office furniture the wife decided I needed! It is black with pewter knobs so....

Sad isn't it!

The rest of the stuff was the result of e-bay (what's new) and a few "For Sale" threads here and there. Initially I was going to update DC by using Celtic Spirit?s Opty 175 and G. Skill PC-4000. Then it was decided to have a contest to see which would perform better Biostar / 175 or nView / 4000+ Brisbane. However after the frustration of reinventing the wheel (couldn?t get it through my thick skull 2 x 512 will always out perform 2 x 1024), ending up with an Opty 170, and running out of time it was decided I'd go with the theoretical oc'ing ability of the Brisbane. Also I decided to test the nView / 4000+ using the Tech Station for all kinds of altruistic reasons.

Besides swapping box parts last Sunday and Monday I threw the mobo assembly and the Tech Station together. With fingers crossed and my eyes shut I pushed the power button....

and was immediately reminded of two things:
1....the board was open box "You will need to reset you bios as the cpu has changed"
2....I need to flash the bios to correct the Brisbane temperature issues as I was showing 51 C for idle in the "Health Status Screen"

So now it is time to stop the physical assembly and begin the testing and oc?ing. As mentioned above I intend to do that as a separate thread and need to get started on that as time allows.

Chow for now!

25-February-08, 12:24 AM		#1 (permalink)
jedihobbit Apex Advanced Techie	DreamCatcher v2.0 "Worklog" Now that Celtic Spirit is again being placed on indefinite hold, wanting to bring DreamCatcher into the realm of AM2, and a serious look at water-cooling, it looks like it is time to move on to v2.0. My initial W/C questions and issues will be presented in another thread (got to get that going!) as well as one following my testing & oc'ing the mobo assembly on air. As everything starts converging for "completion" those two threads will be merged with this one. Here are the component changes that helped me to decide to call it v2.0: Case: Convert MicroFly to MX6 ?Hybrid? Mobo: Abit NF-M2 nView CPU: AMD 4000+ Brisbane HSF: Stock Opty 175 / Tt SmartFan2 Memory: Corsair CM2X1024 ? 6400C4 These components were in the pipeline long before the idea of water-cooling came along therefore running the system on air influenced the original update. Case Conversion: While I love it, Ultra?s MicroFly case has a couple of "flaws". One of which was airflow. Even though it uses a 120mm exhaust fan, intake is a little limited. The front of the chassis has a lot of holes and a 80mm fan, but the front bezel is somewhat restrictive for air intake. The MX6 was the next version of the chassis design and fixed that problem. The bezel uses a mesh surface that is very "breathable" and solved any restrictive airflow issues. I had won a MX6 was about to sell it when I realized I could swap the exterior pieces to give DC better cooling it just took a while to get around to doing that. Also as e-bay would have it I ended up with an nView, so last Sunday I started...... Here sit the two boxes waiting to be "hybridized" and then with everything removed but the bezels. It was interesting to note that when I started taking the boxes apart Ultra opted to drop the four mounting screws used in the MicroFly and rely solely on the four retention clips with the MX6. Admittedly it makes life easier as one does not have to remove the HDD tray and the requirement for a short screwdriver if a PSU is in place. Here we have two views with the front bezel removed and finally a side view with everything together. The left over chassis and exterior parts are headed for Yoda?s SMN, an attempt at a home server build (or excuse to build another computer!). As one that does a lot of his stuff based on the "bling" factor, I'm going to miss the top window (may do one at a later date) but was compensated by the fact the new case matches my new office furniture the wife decided I needed! It is black with pewter knobs so.... Sad isn't it! The rest of the stuff was the result of e-bay (what's new) and a few "For Sale" threads here and there. Initially I was going to update DC by using Celtic Spirit?s Opty 175 and G. Skill PC-4000. Then it was decided to have a contest to see which would perform better Biostar / 175 or nView / 4000+ Brisbane. However after the frustration of reinventing the wheel (couldn?t get it through my thick skull 2 x 512 will always out perform 2 x 1024), ending up with an Opty 170, and running out of time it was decided I'd go with the theoretical oc'ing ability of the Brisbane. Also I decided to test the nView / 4000+ using the Tech Station for all kinds of altruistic reasons. Besides swapping box parts last Sunday and Monday I threw the mobo assembly and the Tech Station together. With fingers crossed and my eyes shut I pushed the power button.... and was immediately reminded of two things: 1....the board was open box "You will need to reset you bios as the cpu has changed" 2....I need to flash the bios to correct the Brisbane temperature issues as I was showing 51 C for idle in the "Health Status Screen" So now it is time to stop the physical assembly and begin the testing and oc?ing. As mentioned above I intend to do that as a separate thread and need to get started on that as time allows. Chow for now! Last edited by jedihobbit; 25-February-08 at 12:39 AM.. Reason: Puntuation issues using ' & "